Outer Limits 4x4 Board

so the axles slide straight in to the mq rear. so i just have to enlarge yhe housing bolt holes and use entire mq rear 3rd member. i am having probs fitting rear gq lsd into mq ring though. will have to rout holes on lsd to fit then mq 3rd member in there to.

have been thinkin a lot about this latley. on my truggy base i have a remote tcase. both out puts are on drivers side so in my thinking a nissan 720 case in front of the mq remote might be easier. 720 case has center out put making it easy to just chop or flip. good luck plese post more info as you ...

i am doing this tommorow kinda. i have gq front and rear housings, both centers as well. I also have 2 mq rear 4.6's one locked one lsd. i plan on runing the mq gears and locker in front and mq gears and gq lsd in the rear. the h/p def bolts in the rear. now just gotta check lsd bolts into crown ...

yep great tyre. better then simex in most situations imo. great on the road have worn well, i have them on my troll so do a few of my friends they all love them.

thanks

thanks

any luck finding pics or links bud?

bj do you know of any links to a mod of this kind? cheers

hey guys i got a l28 mk troll. when bought it i was told all wiring was disconected. ive got everything hooked up but the dizzy seems to only have one wire.(earth). where on the dizzy does the positive wire go? thanks in advance ray

yep too low haha

thanks guys. well i picked up a mq shorty ute today. so i think ill use the compleate gq driveline in the g60 and all my good mq bits in the ute. thanks for your replys ray

well after being offered a rb30 box tcase and motor. I am fitting gq diffs to my g60 this weekend and am going to fit my rear mq locker to the front gq diff. if i remember correctly all i have to do is enlarge the 12 crown wheel bolt holes to 12 mm. am i right. also hoping to fit a spare mq lsd to ...

Nemesis cheers for that link. sorry i wasn't ignoring your reply i have been thinking long and hard on yukon gears. the price is comparable to nissan gears but was hoping to use my rear locker and ratios in the gq's.( to try and save some money) and to get my value out of it.(have rebuilt it twice ...

good call badger.

thanks big scotty

because i want to use 4.6 ratios. 4.1s suck with 37"s. 4.3s are to high and 4.8s to high and from what ive read sound weak as well.

hey guys i saw a thread somewhere on this the other day but cant find it again. trying to keep my pass side offset but need to gain some width to make my 37s clear. want to keep 4.6 ratio as well.
thanks in advance ray

cheers wicked. why would you 60s the front? so you can longfield it? how did you make the center fit? when i look at the front gq and rear mq gears are oppisite directions. i hope im wrong.

ok prob should give a better explanation. i already have mq arb'd 4.6s in it. I recently went from 35x12 trepadores to 37x14.5 creepys and am now finding a lot of tyre rub. i should have installed wider diffs before but now need them. i have gq 4.1s front and rear diff and also have a set of 60 ...

i read somewhere that this was being done a bit. am fitting gq diffs to my g60 with mq 5 speed. would like to keep the same offset. i cant find the original post. thanks in advance ray

back in coffs 0415132695

hey bud i do its in coffs has new blood orange paint. also hve a soft top ute cab . give me a call 07 49267075 ray.

thanks you are most likley right. either way im 25% - 35% lower. idels up stuff at about 200 rpm. and decsents are so slow now. it does feel lower lower then my old marks 5 speed g60 box (which had caball gears) but could just be old tcase was higher.

troll 2 newly aquired unfinished project.

troll 1

as it sits now f&r arbs, xxtra low gears rear spring flip

cool that could be right but the box looks very much like my old l28 5 speed. it is very low in 2 wheel drive though no point using 1st. there is also no adaptor plate. it does crawl very well now. is there any way to tell if its a caball box. i can only go on what i was told and the final drive of ...

bud there is 3 bolts one side has 1 the long plate side has 2. jack it up and rip out the mounts. did mine yesterday. while i fitted a 5 speed.

2 weeks ago i bought a unfinished project mk shorty ute. the cab iks in new blood orange paint. was done a few years ago but hasnt been outside since. http://i179.photobucket.com/albums/w314/builtg60/PA270023.jpg it came with a whole bunch of bits. some dobbin coilovers. http://i179.photobucket.com ...

dellow all the way m arks parts back up service sucks. dellow were a pleasure to deal with. would also choose dellow over crs kit.

damm those trays make the cars look crap. and the wheelbase ext takes away so much in my opinion. gotta tube the tray for good looks me thinks.