Outer Limits 4x4 Board

Does anyone know if anybody makes a steel bash plate for underneath of the radiator on the 75's? My old plastic one has seen much better days.

I have a nasty leak in my power steering somewhere. There is a lot of fluid on the pump, I think it's the pump. Is there a common place for these to leak?? I can't seem to find where the leak is coming from.
Any help would be great.

Sound's like it's gonna be a fun weekend..... Where would I get a new one? Would a place like Repco have them or would I have to go to Toyota?

After a bit of asking around i have worked out that the filter on my evaporator is blocked. My question is, what is the easiest way to get to it to clean it out. It's on a 75 series ute.

I'm trying to install an immobilizer into my 75 cruiser. It's a Rhino RES4601. Has anybody had anything to do with these?? I have connected it as per the instructions but even with it disarmed, the car won't start. There is a relay in the control unit which doesn't seem to be energizing. I can force ...

I a sparky in a salt mine, so you could imagine the trouble we have with moisture getting into electrics. We use a CRC brand spray called Contact Cleaner. It sprays on wet to rinse out all the shit and dries within seconds. I had the same trouble with my winch, sprayed it out and haven't had a ...

Just did that ray, cheers. My fuse panel sticker is not as clear as it once was all good now

I was just pulling the interior light out of my 75series cruiser when there was a bit of a short. obviously the terminals contacted the body of the car. The thing that puzzles me, is that the stereo cut out at the same time. But I can't seem to find the fuse.

Just lookin through this thread, Those diagrams are great, makes it so much easier to realise how the solenoids work. Nice work David

GME have a small bracket that you screw on the side under the bonnet. the tab ends up outside. I have used a few of them on some mine vehicles, they seem to do the job. http://www.gme.net.au/public/images/products/mb403ss.jpg GME also have a glass mounted antenna, I dunno how these perform, but that ...

Bitumen Beast wrote:

RoldIT wrote:http://www.outerlimits4x4.com/sutra684160.php#684160

Thanks for that, I'll go check it out.

Worked perfect, motor is fine. Thanks RoldIT

RoldIT wrote:http://www.outerlimits4x4.com/sutra684160.php#684160

Thanks for that, I'll go check it out.

kond wrote:Are you still trying to get it going . What di you do to it ? hook it up to your nipples see if that works

Ha yeah, it mite work since i'm so "live" Thinking about just going to a 6HP motor if i can't get this one working

I have just overhauled my warn high mount. The solenoids weren't working when i pulled it apart, but the motor was. Is there any way to test the motor without connecting solenoids??

I'm mooving to port hedland shortly so freight shouldn't be a problem in a few weeks. Just on that, is there many places to get all nice and bogged in and around the Port Hedland area??

I've just put a Warn high mount winch on my cruiser and dont know if its worth tryin to sell my old winch. Its a Thomas electric 8000lb winch. I wasn't gonna worry bout tryin to get rid of it cause its pretty old but a few people have told me that it could be a treasure to some people. Not sure.....

I had the same probmlem on my thomas winch. It would reel out but not in. Not very handy stuck to the guts in sand. I asked around, alot of people said it was the solenoids, but what I found was the solenoids earth through the plate they are mounted on. The nut had come loose and it wasn't getting a ...

Im after a bit more travel on my 75 series. It has some fairly heavy springs on the back, but I'm not gonna be hauling any big loads so thats not needed. What are some good setups and is there anybody that does it in or around Cairns??

I am thinking about putting a turbo on my cruiser. Its a '96 HZJ75 with 153000 on the clock. just wondering if the engine is too old and/or too many k's. also should I put an intercooler onto it aswell

The key lock on the outside of the drivers door won't unlock with the key anymore. One day it was working now it wont. Anybody know why or how to fix it??