Outer Limits 4x4 Board

In regards to the timing I am looking into running a Jaycar electronic programmable ignition system that has dual maps just not sure if it will work with rangie yet.

Regards
Kris

Thanks to everyone for your help I have it going and going well. Its running cooler than it ever has its great. Starts first turn of key on both LPG and petrol its great. The problem was the adapter plate. Got new bolts and a new thicker gasket.
I am so happy that it going.

One last question ...

Yeah thanks that was the problem the adapter plate was not sealing so I just plastered it with silicon around the outside.

yeah I found the fuel cut off was not working automatically but still has probs I am going to check timing

It has no choke but not sure about the flooding.

Hey all
At my wits end! I have put the quadrajet on the rangie. Now it will not run. Starts and stalls 5 seconds later. It also backfires through the carbie every time. But it gets worse I have killed the second starter motor in less than a week. At the start fine then battery gets flat hook up to ...

Hey guys got a major drama with the rangie its a 3.5 carb with a quadrajet that I have just fitted. It starts after a fair bit of cranking then stalls 5 seconds later. And it won't even start on LPG. Anyone got any ideas what could be causing this. I thought maybe fuel but that seems fine but not ...

Hey Guys,
Many people told me this was the best way to go so I did. I have got hold of most parts to convert the rangie over to the Quadrajet. Just have to chase up a few small parts from the wreckers. Any got tips, info, photos, step by step guide on how to install and setup this thing.

Regards ...

Hey guys got a strange one here can any give more info regarding the electronic dizzy setup on a 3.5 RRC carby engine its the one with the two wires coming out of it and running to the coil control under the coil.
The main info I am after is whether its a reluctor pickup, optical, halls gap.
Also if ...

Hey guys got another dumb question which manifold gasket do I use with a elderbrock manifold onto a 3.5 carby motor:
1) http://www.roverparts.com.au/inc/sdetail/254 ERC3990
2) http://www.roverparts.com.au/inc/sdetail/253 LKJ500020
3) http://www.roverparts.com.au/inc/sdetail/255 ERC3990
As I am ...

But what if I run it long ways will it fit then?

Hey guys I am chasing a second LPG tank for the 85 Rangie. The current 230k trip distance does not cut it for weekends away. Just want to know if this tank will fit, under the rear of the car minus the petrol tank. Its already on straight gas by Gas Research.
http://cgi.ebay.com.au/ws/eBayISAPI.dll ...

Hey Guys,
This is driving me mental I have a couple of questions. I got the new rangie home today and it is brilliant. I am in love with it. I decided that I would do a full service drop all the fluids and renew the ignition bits and pieces. I went to Supercrap first they had no info books and no ...

Hey Guys

Thank you very much to all the replies I received this but I picked up a complete engine including carbies and clutch everything for a great price of $120. So now I have a complete setup. But I am now looking at buying another 85 rangie so I will end up with three engines in total and two ...

Hey Guys,
Just wanting to know if someone would like to swap a elderbrock manifold and holley carby for the orignal carbies and manifold. I have the elderbrock system on the car now but want to go back to orignal. I have had problems in the past with cars with addons and would like to have a plain ...

Thanks for the advice guys. I drove it back it didn't seem to really lose any water. It looks like the leak is from the thermostat housing. Is there supposed to be a gasket there or not?
But it did lose tons of oil from around the back of the engine underneath, what could this be a sump gasket or ...

Hey all,
I am just new to this site as I just bought my first Rangie 82 Four door of eBay for $600. Now I have to get it the 200 ks home. I don't have a vehicle big enough to tow it. It has a slight water leak from under the intake manifold. Would this be safe enough to drive back as long as I ...