Outer Limits 4x4 Board

total off road sell these and have full replacement no questions asked warranty. ring op lock gladstone.

shit hey wish i had of new at the comp andy (rag racing) is a wizz with the holden pumps. there easy to mod for more pressure and flow. but you have to get the new style pump vx onwards. have you checked pressure either side of the box?

I tried balancing sand in my centipedes didn't have much luck with ill give it another go one day.

Haha dam auto correct. A.r.e or plazma man for a good quality water 2 air inter cooler plasma man are working on dropping there prices so if you wait a few weeks it may be well worth it. A.r.e are in brissy they are exspensive but very good.

Are or plasma man for inter cooler . I brassy are . Be quiet expensive but you get what you pay for.

I run 37"wranglers on 17" walker evans there a great tyre so far. Haven't balanced them yet dont think ill bother the dont wobble at all.

Need to modify the relief so it releaves at higher pressure. Works a treat on the Truck i Navy in but we don't have hydro assist that's later on. You can also use th Nissan pumps .

yes you can use a holden pump you just need to get a pump from a newer model as they flow more plus there is also a few mods you can do to up the pressure in them.

Yeh not to bad never as you know haha.

Garth your still alive how's the rig going? Duramax?

Old truck standard silver top motor made 195rwkw with a badly slipping clutch an yes they do have plenty of torque. My new car im hoping for over 200.

Im trialing a plasma man water to air cooler as well will have results shortly.

Do you mean pump an turbo?. you will have to upgrade ur intercooler to wouldn't expect change from 6k if you do the work yourself (fitting everything).

I have a 14mmsafari plunger Swaffie special pump it runs pretty clean.

They are a journal bearing turbo. There similar size to a 3071. Ufi modify them quite a bit to get them to work this well.

Makes full boost before 2grand 32psi.

I run a united fuel td05 20g great turbo for Wat your wanting an 18g or 16g would be good . If your looking at getting pump mods and a Turbo give diesel central in rocky a ring. Best diesel performance shop in qld. They also sell united fuel turbos..

You'll need a new turbo ballbearing turbos are not rebuildable well Garret only rebalance them when they feel like it.

Ahhhhh god , who pulled his chain haha. Just try an push it o to other companies/people thats the go.

Did the tiger get stuck on an pull a tree over on your car. ( in the 4wdaction shoot).

Been farming rd with the mill with a reasonably thick flange plate I can get it from port shape 2 a circle that made it alot easier.

Dam Would be good to log intake temps on each cylinder on standard manifold. Not exhaust temp of cylinders. Old mavs testing was done 22yrs ago with not so desirable equipment.

Wats the new manifold look like?

I cant see the inlet temps being very different to be honest.
End cylinders may be ...

Lucky we got them afr curves.

Hehehe how'd we get onto 2.5 crds exhaust.


Trying to change the subject

Something in the timing case is not right 180 deg out by the sounds of it.

Would be good to log intake temps on each cylinder on standard manifold. Not exhaust temp of cylinders. Old mavs testing was done 22yrs ago with not so desirable equipment.

Wats the new manifold look like?

Every black tappet covered td42 with the vac pump under the injector pump has 30mma gudgeon.

Wat turbos an Wat size exhaust are use both running

Rob????

Genuine Nissan steel gasket works cost bout $80.

Rob speak to breezy pretty sure his are flipped bead lock rims.

Most of the time it will leak oil from between the pump and block from using a shitty gasket that shrinks. Also you can use 2 bolts out of the pump cover to jack the pump gear off instead of using a puller.