Outer Limits 4x4 Board

hi all, have a couple of questions for you guys. 1. Where can I get a good workshop manual from for my HZJ75 ute? 2. My truck has a tendentcy when started after sitting for a couple of days to sound like it is running on 5 cylinders, like a miss. Can anyone help with this. It only has 145k on the ...

Hi all, Can somone give advise on a replacment divers seat either new , after market or one that will fit in from another vehicle. I need to retain the position that is all the way back as I am 6'3' and own a 75 series ute. Thanks in advance to all that respond

Great work, I have to do this with my windows as I have the same prob with knee hitting the winder. Thanks for the info.

Paul F

Correction, Thats Mild not wild 4x4ing.

Paul F

Hi, If your not doning anything extreme then stick to standard size like 31". for good ride on the road, sand and wild to average 4x4 and good on the buget try 31x10.5 x 15. Ive got steel splits and a set of wides and the wider tyres are much better ride and handling on road.

my 2 cents

Paul F

Hi all, I have a ? for you guys. The oil pressure gauge on My 75 ute(1hz motor) vareis quite a bit, I have checked the owners manual and it shows that the gauge should indicate aywere between the two middle marks of the gauge during normal opperation and, anywere from a bit above the low mark to the ...

Hi All, OK, I am interested in what gains are to be made by fitting extractors or headers to a 1HZ deisel(ute). Did they make any performance improvements for example, power, torque, fuel economy etc. I would like to know what brands, size, and the type of exhaust systems that where used with the ...

This is what i thought, when I got it home I checked them both and they are dry(no oil on the shiny ball surface). I would say that the grease build up is about 3-4mm around the out side of wipers and thats it. As for adjusting the steering there is a split pin that looks like it might be holding a ...

The vehicle failed the inspection due to the following. chips in windscreen(Iwas awear of these) loose front wheel bearings. steering arm play(at the RH nuckle that is closest to the box) and the balljoint grease as discussed. The vehicle has no other faults indicated on the inspection report. He ...

Hi everyone, Have just joined OL4x4 great site. I have just bought a HZJ75 97 model that i thought was road worthy(purchased in NSW transfered to QLD). Put it into the Local Toyota dealer for inspection(Safety Cert) and the mechanic said it needed front end work. The vehicle only has 127K on it and ...