Outer Limits 4x4 Board

I recently bought a projecta dual head cheapy off of ebay... was a bit bigger than I expected. Going to put it on the passenger side of front wheel arch but have to relocate the filters on it otherwise it doesn't quite squeeze in..

you'd know if you had spring wrap! haha on acceleration particularly in 1st and 2nd on road you get a mega shudder and noise from the rear driveshaft, and your springs go S shaped... basically its the weight of the tyres forcing the leaves to twist before the tyres turn, eventually the driveshaft ...

from what ive understood you need the crank pulley from a swift and water pump pulley from a Vitara and you can use the sierra waterpump.

But if you change your waterpump then go for a swift one and use all swift pulleys and even a swift alt as they have a bigger amp rating compared to the sierra ...

Haha ok, I'll go through another search for those items. Its like finding buried treasure!

Hey Pezooki, Thanks for the reply.

Ok, will have to have a look at the wreckers for the pulley and see what I find, unless anyone knows of a direct fit from a another car.

If I was to swap to a multi rib setup, is there any known replacements for the rest?

Ok, so you just added the extra charge ...

On the topic of the steering, What should be done to service the parts? Oil, Grease?

Have had a read through various topics on the subject and answered most of my questions. however still pondering on a few...

Pulleys... What choices do I have for putting on a Ford 110amp for a straight swap to suit the sierra V belt??

Regulator... I will be putting in a Optima D34M, do I need to ...

Ok, here is some n00bness from me about suspension and what to do, I've looked at the bible, never have played with changing suspension and just not sure what I want...

I currently have a stock 94' Sierra, which is my daily runner and also a long term project for me to work on.

I want to improve ...

Thanks! With a bit of screwdriver leverage off they came

This may sound like a stupid questions, but I rather be safe than sorry and snap something with undue force...

I just want to confirm that the diff breather cap on the sierras just pop up and off.

Thanks

ok - how about the hoop that the seats clip onto??? can you take the clip part off the seats, have a small hole in the toolbox for the car's hoop to come through and the chair thingo's clamp onto it to hold the box down?

then its a lever release, and still cheap as without modifying the body ...

what about using the bolts/holes that used to hold the rear seats in?

Yeh, thats what I thought if I go that way.

So there's no lockable clamping systems that I could put on both the box and car to hold it down?

I was thinking of using something like a ojop fastener ( http://www.uesint.com ...

Just after what methods people use to secure a large checkerplate tool box to a vehicle...

I could easily drill some holes in the bottom and bolt it down, but I want to try and avoid that so in the future I don't have nice holes in it if i want to use it for something else.

Are there any easily ...

I got a response from the guy, apparently they are currently trying to setup a distributor in Queensland.

Have asked him when its expected to happen and if the price will variate.

grimbo wrote:

foonji wrote:This is just what I want for my SWB!

they do SWB as well

I saw, I saw. The 2-piece looks like a winner for me.

Sent an email to find out how much shipping from america is... probably be 200-300$

This is just what I want for my SWB!

Im in the same predicament, i carry around $20k+ of photographic equipment and laptop and need a place to secure it...

i decided i'll go with the 'toolbox' option as I don't have rear seats, have been looking at this style box from diamond T http://www.diamondtproducts.com/product.asp?ProdID=21 ...

Noice, I think I'll be getting myself a pair will have to upgrade the loom for sure.

Thanks for the reply!

Has any one used these headlight upgrades so you can use H4's?

http://cgi.ebay.com.au/Suzuki-Sierra-Samurai-Hilux-7-Round-Focal-Head-Lights_W0QQitemZ200345861145QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item2ea58b3c19&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318%7C301 ...

Does anyone know of any good wreckers in or around Brisbane to get some GTI seats?

Just went to one who had zilch...

Mine occasionally does that which im suspecting is the fuel filter as well, it looks like it hasn't been changed since the car was built... got a new one waiting to be put on.

haha I wish it was that easy mate...
Currently all my tools and equipment is still located in Adelaide.
so an easy way of not having to hack, build and engineer is preferred.

Does anyone know if the seats from a newer 2005 Suzuki Swift will fit into a Sierra without mods? straight onto the sierra rails...

Thanks
Michael

My father picked it up for me, so i didn't get to talk to him.

All the report says is "Both Front Wheel Bearing Play"

I am going to take it elsewhere though.

Recently I took my sierra to get a RWC so i can transfer it from SA to QLD and it came back with a fail... the mechanic was on crack and I lost $60...

Among the petty little things he said about it, he said the front wheel bearings have to be done... I've jacked it up and there is no vertical ...