Outer Limits 4x4 Board

Bit of a silly question but does any know if Pintle Hooks are rated,

if so how much is the rating on them

Thanks Lordtrucks ill have a look this weekend

jono

At less i am not driving a shinney SCOTT. Yes there is a 50 mm body lift and i have cut out the for the lever for both 2wd and 4 low sorry i for got to add it not my truck that is having the problem its a buddy that i go out with and yes his truck is a little better looking then mine. it feels like ...

Having problems getting the truck into low range.

the leave will move up to 4hilock and then slide sideways but not enuff to allow the leave to slide forwards to pickup 4lolock

any ideas on what may be the problem.

is the 2.8D engine able to be bolted straight into the same spot as were my old 2.5 is on a swb soft top year 91

cheers Jono

My high Low transfer box is cliking when in 4 low in 2nd gear while under power. i beleave it is the chain slipping. This is the second time that i have had to fix this. Last time i had to replace the hole unit. Is there any way in helping to stop this problem i have or am i just to hard on the ...

Not Yet. I am sorting out a custom bar at this time. so ill try and sort the winch at the same time.

Can any one please give me some ideas on how to mount a warn 9000 to a 91 soft top 2.6TDi.

Even picture of your mounts will help me out


Cheers
Jono

How hard will it be to swap over a 2.8 TDi into a 91 Jtop which has a 2.5.

reason being is thatt the 2.5 it dieing slowly.

Any tips

jono

cheers for that ill have a look for the gregory this week

I was travling home from a trip in the week end and the center diff light came on.

Can any one help me with wont have triggered this.

Jono

oooooo bugger. Thank you for that information.

am i able to change the gear on the input shafe for the PTO so that it will work.

Does anyone know if a Gen1 1986 parjio PTO will fit on to a 91 PARJIO softtop superselect

can any one tell me which relay is the turn relay.

as i have to fix my turn signals due to not working

Has any one got plans for front and read bull bars for a 91 SWB paj.

I am looking at making one up for my self, and i am finding it hard to design one that is going to work well.

i didnt think about the cluch. mmmmm

but would just let the revs race up untill you hear them.

it is a very short bust.

this may be a silly question. i was out wheeling on the weekend and found i had a small surge when driving up the hill in 4x4 high. this did not happen offen. felt like when u drive over ice the wheel slips. Yes i was driving in the alps but i was only on the access road and it was dry and dusty. I ...

i did mine with a mate at a garage with a host. it took me about 6 hours in and out.

the mate helped lift it out and back in once i had the new transfer box on.