Outer Limits 4x4 Board

My patrol is pumping water out of my radiator on start up so i'm gathering I have done a head gasket but i have been told it is more likely the head itself. Is this a common thing for there to be head problems rather then gaskets or is it just crap I have been told. Any help would be great cheers.

I have a 2003 79 series ute with handbrake issues, I have replaced everything from the drums shoes and cable but yet it will not hold. I have adjusted the shoes up but still nothing. Any help would be great. Cheers

I had my 80 cut down by the guys at S&T Fabrications in yatala and just had them put a quick coat of white paint over it. Job came out looking like factory. The only thing i supplied was a rear panel and glass off a ln106 hilux to get fabed in cost around $5000 to do the job but i built the tray. It ...

are you going to post some pics to see if anyone can do this for you.

Hi guys i asked a little while back with not much luck but i am hopeing this time someone will be able to help. What i have is the contura switches with 4 post at the bottom on/off style switch. Now i can get them to work but i have know idea why the light wont come on is there a special way to ...

why not hunt down a turbo of a surf i had a 5l and put the 2.4 turbo surf set up on mine ran about 8 pound went real well.

hi guys just purchased a few switches and am not 100% sure on the wiring. Now iwhat i have is an on/off switch with the 4 pins numbers 2/3 and 5/6 i know how to get power to them but i can not get the light to come on when i turn the switch on. Can anyone tell me the correct wiring or show me a ...

Hi guys have just done a cab cut on my 80 series wagon well i did not do it all. My question is with the wiring harnes and its colours i have found the indicators brake and park light but have no idea what the others are for so iam wondering if anyone knows what colours are for what eg rear fuel etc ...

a mate of mine had a hilux with the 3l motor and we did the timing belt and change all bolts all was good and then he developed this top and knock as well. I thought at first it was an injector or or something with the fuel but when we started to have a closer look we found that the crank pully on ...

i had a 92 hilux with 33's and ran 4.5s seemed to go pretty good.

mate had a similar problem on my 80 series with the xtrek2s sounded as if the roller coaster at dream world was coming in to stop. Now all though a quick repair to rectify this problem it was a hard one via taking the 36s of and puttind the 31s back on. I know this will make your truck look soft but ...

check the slave and master cylinders make sure that you are getting full travel out of the slave cylinder or try bleeding it. let us know how you go.

mate not sure if it would be a uni considering it goes away when you put your foot on the clutch considering your tail shaft is still spinning. Is the noise still there when your not moving. It maybe a dry throw out bearing. if it is a flogged out uni it should have movemnt try lifting your shafts ...

myself and three other mates have run the tough dog adjustables for the past 4 years on both 80 series and gq patrols and have found them to be excellent shocks. We have found a happy medium in adjustment for on and off road but have wound them right down on different tracks. I was told from one of ...

have you just fitted the lift in this if so try tightening all your bolts on your drag link and all steering arms. I had a similar problem in an 80 series and this was the problem when fitted the bolts had not ben tightened enough.

try with replacing your slave cylinder first you may find that is the problem. Try it as a cheap solution first before taking the box out to find that your clutch is fine.