Outer Limits 4x4 Board

Hi All, I have a late 1984 LN65 Hilux. The drivers side door hinges are getting very worn. I have searched the internet over & over but cannot find the info that I am after. Will early hilux hinges pre 83 fit or post 88 fit as you cannot buy new hinges for LN65 models anymore according to Co-Op ...

Hi all I am after some technical information. I have recently bought a front end damaged ~ 93,000 km ~ manual ~ 3.5 ltr Petrol ~1997 NK GLS Pajero at auction. i have since bought all the replacement parts I need to fix this Pajero up. But I have now discovered the front chassis as bent. NOW my ...

Hi All, just wanting to ask if anyone knows if 1989 onwards door hinges will fit a 1984 LN65 hilux. If not can you buy pre 1989 hinges new & if so where from. If you cant buy them new does anyone have a set especially drivers side in excellent condition they might want to sell. My contact number is ...

The problem is I dont have the standard toyota pump as I only bought the box. Also as I said I just got Enzed to make new long hoses to go along the bottom of the radiator to the left hand side of the chassis (on an angle iron bracket I made up between the chasis rails) & up to the pump on the left ...

Hi All , I have just (yesterday) fitting a power steer box to my 1984 Hilux with a 253 V8 Holden motor fitted. (beam/solid axle front end) I have just got (Enzed Hose Doctors) to make some new hoses. I was all set to use the Holden power steer pump but I was told yesterday the Holden pumps seem to ...

When I said which tyres are best I meant - Off Road performance , On Road performance , For Noise & For Km Wear (how long do they last using them on & off road as dailydrivers). I know its better having a second set of tyres to change over too but that can be a pain it the *** for a number of ...

Hi all , I am fitting NEW tyres to my Holden V8 1984model Hilux. The local Bob Jane Tmart have a set of 33-13.5-15 Maxxis Mudzillas M/T (VERY aggressive Mudders) in stock which I had a look at & am interested in but they seem to think their life is only around 30,000 kms & are Very Noisey on road ...

Just as the question asks ! I need a bullbar for my 97nk gls & have the chance to get a alloy tjm bar but its off a 91nh gls. Will it Fit ??? Thanks- Trent.

Also would a inticator/wiper switch fit out of a RN46/50 fit in a (1984)LN65 ? Cheers- Trent

He wanted $7,999 but will take $7000.

Hi all , I am in Tasmania & currently looking at buying a Pajero for the first time . The Pajero I am wanting is located in Sydney which does not worry me flying over to pick it up. NOW to the Pajero I am keen on buying -: It is a December 1992 Pajero , 3.0 litre V6 , GLS , 5 speed , 7 Seater Wagon ...

BUMP

Hi all , I have a 1984 Hilux single cab of which I currently run 33" mudders on 15x10 sunraysias. I have a set of 35" mudders on 15X13 custom made sunraysias that I am going to fit to my hilux . There are no problems fitting these on the rear as I test fitted these once before when I built my custom ...

Bump - still confused

bump- still very confussed

BUMP

(1) Can anyone post a picture/diagram of a 1984 factory diesel model instrument panel showing what lights are where e.g.- charge light, brake, parh brake, glow ect,ect. (2) which colour is the instrument panel charge light wire (exiter wire) that i need to connect to the holden alternator ...

Hi all , I have a 1984/85 Toyota Hilux 4x4 LN65 single cab (solid/beam axle model). I am going to fit fit a power steering box to this 4x4 (this originally a not having power steering on this 4x4). My question is - are the steering columns the same length on the models fitted with power steering to ...

Hi, Has anyone fitted or had a Safari Snorkel fitted to suit a 1984 to 88 Hilux / 4 Runner ( part no.SS65HF ). If so DO YOU still have the cardboard template for the hole marking & positioning that would have come with the snorkel kit in the box. I have just bought a snorkel 2nd hand & dont want to ...

Hi all, I am just about to fit a black plastic Safari Snorkel to my 1984 model Hilux. What I need to know does anyone have a set of original instructions on how to fit one of these. Has anyone here fitted one to an 1984 to 1988 Hilux or 4 runner if so are you able to email me a copy of the fitting ...

will a steering box off a early/mid 90's RN/LN 106 beam/solid axle hilux fit or bolt up using the the same bolt hole pattern as a 1984 LN 65 beam/solid axle hilux cheers- Trent

The main ones im after are LN/RN 46 = what years made ? , LN/RN 65 = what years made ? , LN/RN 106 = what years made ? . also are these models all Beam / Solid Front Axle or Independant ????? Cheers- Trent

still need help !

help still needed !

Hi All , I ve just finished fitting a Holden 253 V8 to a 1984 Hilux single cab 4x4. now the HUGE problem i,ve encounted is due to running the factory brackets for the alternator & power steering (alt is on the right hand side & p/steer on the left) & also needing the triple type pulley on the ...

Hi All - Ive just bought a 1984 Hilux 4x4 Single Cab Flat-Tray fitted with a 253 V8 Holden motor. This rig was in need of a complete rewire from front to back due to a horrid back yarders attempt at some stage in its life. With now 95% of it done im only left with the alternator to wire up. This ...