Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

dual cab 80's

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Post by brentz »

mate go on 2 3rdrock for the buildup on the one in the link above and looks up daz in the members section on his 80 dual cab ute!!!
there hasnt been much work lately on it cause of his 40 but its goin good and will turn out awesome!!!
brentz
TUF-60 starting build soon
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Daz will be back on to the 80 real soon.

Its short list is
302 winsor
straight gas
auto
60 series tcase
Bobbed and uted
bla bla bla.

Oh and before anybody says anything about the 302 being to small for an 80, yeah it might be but atleast it will sound good and the WHOLE setup from the motor to tcase and the gas only cost $1000.
Top
Posts: 262
Joined: Sun Sep 11, 2005 8:39 pm
Location: ipswich

Contact:
Contact Zuki

Post by Zuki »

picture by offroadimages
more pics of troy callinan and ryna thomas rig at
http://www.offroadimages.com.au/4x4even ... ?album=445

Image
gu ute 4"coils, amada xtremes, chopped chassis 450mm, 37" treps, rock sliders, internal cage, roof sliders, f&r air lockers, uhf, modified highmount winch, UFI turbo, km diesel inj pump.
Top
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

Sixty wrote:
Zuki wrote:this is all i got for now. cheers
Any more pics/info on the yellow dual cab...?
Here's a few from Round 1 Xtreme (top 2) and Round 1 Qld Winch (bottom 2)
Image

Image

Image

Image

Cheers,
Ryano
Hi!
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

smashed in the rear of my 80 and now look like i will be doing a dual cab conversion to.

i love the looks of that yellow 80 :armsup:
hope mine comes out that good.
if anyone has done this before let me know what to look out for.
and best ways of keeping the rear factory glass.
sorry for ambushing.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 59
Joined: Thu May 10, 2007 3:31 pm
Location: Geelong

Post by chpd 80 »

This is my 80 series, K'js off road centre in Geelong
did the chop & I welded up the custom tray. (Sorry
I dont know how to make photo smaller???)
Image[url]
Top
Posts: 182
Joined: Sun Jun 26, 2005 9:30 pm
Location: Port Hedland

Post by CruiserCruising »

Thats a awsome lookin chop got some more pics???
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

MMM one of these would sure make a good tow rig for the lux i'm thinkin seriously anyone know of 80's with chev v8 deisel conversion.
plenty of parts on the bench
Top
Posts: 59
Joined: Thu May 10, 2007 3:31 pm
Location: Geelong

Post by chpd 80 »

Still getting my head around photo bucket so excuse the massive size
of the pics, Sure I'll work it out soon.
Will put some more pics up when I've got more time, Cheers :D :!: :!:
Image
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

hey mate where did the rear section come from?
Is it the rear door grafted back on to the body?
I am in the planning stages at the moment of doing this myself. any info/ photos would be awesome.


by the way. looks sweet as. :armsup:
MUD, MUD, GLORIOUS MUD!
Top
Posts: 59
Joined: Thu May 10, 2007 3:31 pm
Location: Geelong

Post by chpd 80 »

Thanks simkell, Yeah I had the barn doors on my wagon, and upper rear tailgates are way expensive at wreckers so we cut up the barn doors.

Basically(very basic) the D pillar section including roof was cut and moved forward to match up with the C pillar, trying to keep it as small as possible.
Then we took all hinges etc off barn doors cut em in half and welded them on!! The rear window is 4.5mm tinted perspex, and I cut up the old cargo barrier and re-fitted inside for protection etc.etc.etc (lots of etc's). :D :D

I wanted to do something different from everyone else with the tray so I crossed the rear bars instead of straight down, took a while to get used to the look of it but I like it now.

It would be a lot easier to cut it behind C pillar and fit a flat wall from top to bottom, but the extra effort to keep the rounded look of the 80 series was well worth the effort in my oppinion.

Anyway I could ramble on forever about it but it'll just bore everyone so I'll catch ya later.
ps. Any other questions dont hesitate.
Top
Posts: 59
Joined: Thu May 10, 2007 3:31 pm
Location: Geelong

Post by chpd 80 »

Worked out the sizing problem, turned out
I wasn't swearing at the computer enough.
Problem fixed now though.
Image
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

oh got a chuby :armsup: just gotta talk me girlfriend round :cry:
plenty of parts on the bench
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

Sic Lux wrote:oh got a chuby :armsup: just gotta talk me girlfriend round :cry:
weirdo


nice 80, both chpds and lepars
turbos are nice but i'd rather be blown
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

chunderlicious wrote:
Sic Lux wrote:oh got a chubby :armsup: just gotta talk me girlfriend round :cry:
weirdo


nice 80, both chpds and lepars
"Chubby" looks nice :armsup: , as well looks better than ur 4B when i seen it last.
plenty of parts on the bench
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

mine still looks better than yours :finger:
turbos are nice but i'd rather be blown
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

chunderlicious wrote:mine still looks better than yours :finger:
what a chassis and a cab :rofl: WTF
plenty of parts on the bench
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

body is for sale ;)

http://www.3rdrock4x4.com/forum/viewtop ... &start=150
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

been following that build up to :cry:

his 40 was sweet and i knew the 80 would of been good to
MUD, MUD, GLORIOUS MUD!
Top
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

Post by BadLux »

Not a dual cab but wow!!
http://www.carsales.com.au/Tig/UI/CSPho ... lID=240481
Top
Posts: 1442
Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw

80

Post by 75 cruser »

that was for sale at tuff truck

rob
come on move over and let the 75 through
Top
Posts: 106
Joined: Sun Jun 26, 2005 12:37 pm

Post by chook05 »

Sic Lux wrote:MMM one of these would sure make a good tow rig for the lux i'm thinkin seriously anyone know of 80's with chev v8 deisel conversion.
I`ve got an 80s with a 6.2L chev diesel sitting in the shed about to be choped to dualcab this week if your interested.
Top
Posts: 288
Joined: Sat Mar 18, 2006 4:30 pm
Location: Darwin

Post by jsttry »

That looks sweet, shame its over $26k :(


A few more also on carsales
http://www.carsales.com.au/Tig/UI/CSPho ... lID=240481



http://www.carsales.com.au/Tig/UI/CSPho ... lID=240481
Top
Posts: 79
Joined: Sun Oct 01, 2006 2:36 pm
Location: hervey bay or any pub

80/s

Post by 69mud »

here is a link to my 80 extra cab project ....hopefully with rego next week




http://www.4wdmonthly.com.au/shed/index.php?id=298
extra cab 80
6"s up
locked both ends
35 claws
http://www.4wdmonthly.com.au/shed/index.php?id=298&im=1
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=114113
Top
Posts: 259
Joined: Mon Dec 04, 2006 5:25 pm

Post by nate_lux »

80 series utes rock :D
Top
Posts: 15
Joined: Tue May 01, 2007 2:24 pm
Location: Darwin, NT, Aus

Re: 80/s

Post by stinky »

69mud wrote:here is a link to my 80 extra cab project ....hopefully with rego next week




http://www.4wdmonthly.com.au/shed/index.php?id=298
thats tidy! :cool:
1994 Landcruiser wagon

www.darwin4x4.net
Top
Posts: 259
Joined: Mon Dec 04, 2006 5:25 pm

Post by nate_lux »

BadLux wrote:Not a dual cab but wow!!
http://www.carsales.com.au/Tig/UI/CSPho ... lID=240481
fark yeah!! :twisted:
Top
Posts: 79
Joined: Sun Oct 01, 2006 2:36 pm
Location: hervey bay or any pub

my 80 extra cab

Post by 69mud »

my 80 extra cab not finished yet bet getting closer
Image Image
extra cab 80
6"s up
locked both ends
35 claws
http://www.4wdmonthly.com.au/shed/index.php?id=298&im=1
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=114113
Top
Posts: 59
Joined: Thu May 10, 2007 3:31 pm
Location: Geelong

Post by chpd 80 »

Hey nice chop "69 mud", Good to see there are more and
more people willing to chop up perfectly good wagons.

Nice bar work on the tray too :D
What could possibly go wrong????
Top
Posts: 79
Joined: Sun Oct 01, 2006 2:36 pm
Location: hervey bay or any pub

Post by 69mud »

chpd 80 wrote:Hey nice chop "69 mud", Good to see there are more and
more people willing to chop up perfectly good wagons.

Nice bar work on the tray too :D


thanks chpd ...its good to get this project to a end .. hanging out to get out and use it .. still needs fair bit of finishing off but i getting there
extra cab 80
6"s up
locked both ends
35 claws
http://www.4wdmonthly.com.au/shed/index.php?id=298&im=1
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=114113
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 141 guests