Hey guys,
Got a mate who is rebuilding his head and can’t seem to get the mechanical lifters out!
Doesn’t seem to be anything to grab then with! There is only the divot that the rod sits in. Even turning the cam shaft doest bring them high enough to get anything to wedge them out.
Any suggestions would be appreciated - have also included pic.
Thanks in advance!!!
Dom
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
need help removing lifters - 3F 60
Moderators: toaddog, Elmo, DUDELUX
will see what they have cheersdogbreath_48 wrote:Any decent tool shop will sell them in telescopic and flexible configuration.borisr33 wrote:thanks kamo....its hard to find a small strong magnet but will give it a try
i have seen lifter removing tools for hydrolic lifters but not mechanical...any more info on this???Modified Toy wrote:you need a lifter removing tool
they are slightly mushroom shaped but with a divot in the middle that the push rod locates in......hhmmmRED60 wrote:If they're mushroomed on the bottom you mite hav a problem.
Evil 73 wrote:Easiest solution is to burn the 3F boat anchor motor, i burnt mine!!!!
Ben
Hey Ben that must of been a sight. How did you manage that?
Though I don't think my mate will go for this one.....
Who is online
Users browsing this forum: No registered users and 2 guests