need help removing lifters - 3F 60

[borisr33]

Hey guys,

Got a mate who is rebuilding his head and can’t seem to get the mechanical lifters out!
Doesn’t seem to be anything to grab then with! There is only the divot that the rod sits in. Even turning the cam shaft doest bring them high enough to get anything to wedge them out.

Any suggestions would be appreciated - have also included pic.




Thanks in advance!!!

Dom

[KaMo]

A small, strong magnet on a stick?

[borisr33]

thanks kamo....its hard to find a small strong magnet but will give it a try

[dogbreath_48]

thanks kamo....its hard to find a small strong magnet but will give it a try

Any decent tool shop will sell them in telescopic and flexible configuration.

[Modified Toy]

you need a lifter removing tool

[RED60]

If they're mushroomed on the bottom you mite hav a problem.

[Evil 73]

Easiest solution is to burn the 3F boat anchor motor, i burnt mine!!!!

Ben

[borisr33]

thanks kamo....its hard to find a small strong magnet but will give it a try

Any decent tool shop will sell them in telescopic and flexible configuration.

will see what they have cheers

you need a lifter removing tool

i have seen lifter removing tools for hydrolic lifters but not mechanical...any more info on this???

If they're mushroomed on the bottom you mite hav a problem.

they are slightly mushroom shaped but with a divot in the middle that the push rod locates in......hhmmm

Easiest solution is to burn the 3F boat anchor motor, i burnt mine!!!!

Ben

Hey Ben that must of been a sight. How did you manage that?

Though I don't think my mate will go for this one.....