Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need help removing lifters - 3F 60

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 34
Joined: Thu Mar 17, 2005 11:00 am
Location: Melbourne, Burwood East

need help removing lifters - 3F 60

Post by borisr33 »

Hey guys,

Got a mate who is rebuilding his head and can’t seem to get the mechanical lifters out!
Doesn’t seem to be anything to grab then with! There is only the divot that the rod sits in. Even turning the cam shaft doest bring them high enough to get anything to wedge them out.

Any suggestions would be appreciated - have also included pic.



Image
Thanks in advance!!!

Dom
Top
Posts: 249
Joined: Wed Apr 14, 2004 6:00 pm
Location: West Aus

Post by KaMo »

A small, strong magnet on a stick?
Top
Posts: 34
Joined: Thu Mar 17, 2005 11:00 am
Location: Melbourne, Burwood East

Post by borisr33 »

thanks kamo....its hard to find a small strong magnet but will give it a try
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

borisr33 wrote:thanks kamo....its hard to find a small strong magnet but will give it a try
Any decent tool shop will sell them in telescopic and flexible configuration.
Tetanus rolling on 37's
Top
Posts: 417
Joined: Wed Jul 13, 2005 8:30 pm
Location: NSW

Post by Modified Toy »

you need a lifter removing tool :)
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

If they're mushroomed on the bottom you mite hav a problem. :cool:
Show me the money..SHOW ME THE MONEY
Top
Posts: 214
Joined: Tue May 30, 2006 6:37 pm
Location: Gembrook,Vic

Post by Evil 73 »

Easiest solution is to burn the 3F boat anchor motor, i burnt mine!!!!

Ben
BIGGER THE PROBLEM, BIGGER THE HAMMER.
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
Top
Posts: 34
Joined: Thu Mar 17, 2005 11:00 am
Location: Melbourne, Burwood East

Post by borisr33 »

dogbreath_48 wrote:
borisr33 wrote:thanks kamo....its hard to find a small strong magnet but will give it a try
Any decent tool shop will sell them in telescopic and flexible configuration.
will see what they have cheers
Modified Toy wrote:you need a lifter removing tool :lol:
i have seen lifter removing tools for hydrolic lifters but not mechanical...any more info on this???

RED60 wrote:If they're mushroomed on the bottom you mite hav a problem. :cool:
they are slightly mushroom shaped but with a divot in the middle that the push rod locates in......hhmmm

Evil 73 wrote:Easiest solution is to burn the 3F boat anchor motor, i burnt mine!!!!

Ben
:lol:
Hey Ben that must of been a sight. How did you manage that?

Though I don't think my mate will go for this one.....
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 81 guests