Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cv question
Cv question
Hey all,
Question bout Cv's, brother has a worked 2ltr in the zuki we just built... all that power and welded front, mixed with new 33's = no drive to one wheel. Im thinking some more ppl have stuffed them to! how much do u guys pay new and or second hand ones? we are in tas and being told about 500 for a new one looking for a second hand one now.
Adam
Question bout Cv's, brother has a worked 2ltr in the zuki we just built... all that power and welded front, mixed with new 33's = no drive to one wheel. Im thinking some more ppl have stuffed them to! how much do u guys pay new and or second hand ones? we are in tas and being told about 500 for a new one looking for a second hand one now.
Adam
2nd hand they're worth about $150 each if you can find them
You're just going to keep doing them though unless you A) stay well off the throttle and B) upgrade to 26 spline CrMo axles.
$500 new is about right.
Remember, ALWAYS remove the CV as soon as it breaks. They have a nasty habit of jamming up the steering if you drive on them when they're broken.
Steve.
You're just going to keep doing them though unless you A) stay well off the throttle and B) upgrade to 26 spline CrMo axles.
$500 new is about right.
Remember, ALWAYS remove the CV as soon as it breaks. They have a nasty habit of jamming up the steering if you drive on them when they're broken.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Steve what have you been paying for the CrMo units ? is it compareable to the new price of a stocker ?Gwagensteve wrote:2nd hand they're worth about $150 each if you can find them
You're just going to keep doing them though unless you A) stay well off the throttle and B) upgrade to 26 spline CrMo axles.
$500 new is about right.
Remember, ALWAYS remove the CV as soon as it breaks. They have a nasty habit of jamming up the steering if you drive on them when they're broken.
Steve.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
So new OEM vs CrMo is very reasonable. I have purchased whole suzuki's for less than $500.Gwagensteve wrote:They range between US$500 and US$700 a pair.
Steve
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Calmini axles seem to be a cheap go between stock and full blown chromo ones. Check them out if you are on a tight budget. But with a worked 2 litre and welded diff on 33's I'd be going the ducks nuts of axles.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
But then you still need to upgrade the cv's. Cheapest way is birfield cups and they are $50 a pop, add that to $140 a side for calmini axles and that will get you up over $400 by the time you get them here. May as well go for chromo axles and cv's then.GRPABT1 wrote:Calmini axles seem to be a cheap go between stock and full blown chromo ones. Check them out if you are on a tight budget. But with a worked 2 litre and welded diff on 33's I'd be going the ducks nuts of axles.
Who is online
Users browsing this forum: No registered users and 9 guests