Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tail shaft builders/ Sales

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 29
Joined: Mon Mar 15, 2010 6:02 pm
Location: forster

Tail shaft builders/ Sales

Post by tezza88 »

i went for a 4by run yesty and turned my tail shaft into a cork screw, so does any 1 know of a good place to go to, to have a new one made up?
79 series cruiser, 6" susp., 3' body lift, rear coil conversion, 35" baja claws... fully engineered and lockers on the way
Posts: 458
Joined: Tue May 24, 2005 12:21 pm
Location: Brisbane

Re: Tail shaft builders/ Sales

Post by Josh n Kat »

a wreckers would be a good start.
where are you?
Honey i cut the car in half!
Posts: 29
Joined: Mon Mar 15, 2010 6:02 pm
Location: forster

Re: Tail shaft builders/ Sales

Post by tezza88 »

nar, dont want to just throw a standard one back in, i wanna fix the problem, so upgrade time :snipersmile: probably get the ends chooped off and have a stronger center put back in it, but then it will need to be ballanced and all that so just wondering if any one knows a good tail shaft maker that can be recomended. in in the mid north coast but distance doesnt really bother me as it'l brob have to be sent away any way
79 series cruiser, 6" susp., 3' body lift, rear coil conversion, 35" baja claws... fully engineered and lockers on the way
Posts: 384
Joined: Fri May 14, 2004 8:46 pm
Location: Yeppoon Queensland

Re: Tail shaft builders/ Sales

Post by stinger »

After breaking three sliding splines provided by a different tailshaft mob, Driveline Services Rebuilt mine. They used a std rear uni joint, a light truck sliding spline and front uni with a custom machined front plate to mount to the transfer case.

So far so good....
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: Tail shaft builders/ Sales

Post by Mr DJ »

Hardy Spicer do everything from std shafts to shafts for heavy mining.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Posts: 29
Joined: Mon Mar 15, 2010 6:02 pm
Location: forster

Re: Tail shaft builders/ Sales

Post by tezza88 »

thanks guys,
stinger, wot did that cost you to have made?
79 series cruiser, 6" susp., 3' body lift, rear coil conversion, 35" baja claws... fully engineered and lockers on the way
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests