Tail shaft builders/ Sales

[tezza88]

i went for a 4by run yesty and turned my tail shaft into a cork screw, so does any 1 know of a good place to go to, to have a new one made up?

[Josh n Kat]

a wreckers would be a good start.
where are you?

[tezza88]

nar, dont want to just throw a standard one back in, i wanna fix the problem, so upgrade time probably get the ends chooped off and have a stronger center put back in it, but then it will need to be ballanced and all that so just wondering if any one knows a good tail shaft maker that can be recomended. in in the mid north coast but distance doesnt really bother me as it'l brob have to be sent away any way

[stinger]

After breaking three sliding splines provided by a different tailshaft mob, Driveline Services Rebuilt mine. They used a std rear uni joint, a light truck sliding spline and front uni with a custom machined front plate to mount to the transfer case.

So far so good....

[Mr DJ]

Hardy Spicer do everything from std shafts to shafts for heavy mining.

[tezza88]

thanks guys,
stinger, wot did that cost you to have made?