Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tail shaft builders/ Sales
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Tail shaft builders/ Sales
i went for a 4by run yesty and turned my tail shaft into a cork screw, so does any 1 know of a good place to go to, to have a new one made up?
79 series cruiser, 6" susp., 3' body lift, rear coil conversion, 35" baja claws... fully engineered and lockers on the way
Re: Tail shaft builders/ Sales
a wreckers would be a good start.
where are you?
where are you?
Honey i cut the car in half!
Re: Tail shaft builders/ Sales
nar, dont want to just throw a standard one back in, i wanna fix the problem, so upgrade time probably get the ends chooped off and have a stronger center put back in it, but then it will need to be ballanced and all that so just wondering if any one knows a good tail shaft maker that can be recomended. in in the mid north coast but distance doesnt really bother me as it'l brob have to be sent away any way
79 series cruiser, 6" susp., 3' body lift, rear coil conversion, 35" baja claws... fully engineered and lockers on the way
Re: Tail shaft builders/ Sales
After breaking three sliding splines provided by a different tailshaft mob, Driveline Services Rebuilt mine. They used a std rear uni joint, a light truck sliding spline and front uni with a custom machined front plate to mount to the transfer case.
So far so good....
So far so good....
Re: Tail shaft builders/ Sales
Hardy Spicer do everything from std shafts to shafts for heavy mining.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Coil SAS by www.budscustoms.com.au
Re: Tail shaft builders/ Sales
thanks guys,
stinger, wot did that cost you to have made?
stinger, wot did that cost you to have made?
79 series cruiser, 6" susp., 3' body lift, rear coil conversion, 35" baja claws... fully engineered and lockers on the way
Who is online
Users browsing this forum: No registered users and 0 guests