Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

OIL AND WATER LINES FOR TD42 WITH TURBO - HELP

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

OIL AND WATER LINES FOR TD42 WITH TURBO - HELP

Post by Daisy »

Ok.. let me explain what ive done.

TD42 fully rebuilt.

Sourced a GU 4.2 turbo kit and in the middle of bolting it all together.

All seems to bolt up okay EXCEPT 4 things.

OIL in
OIL drain
WATER in
WATER drain.

One of the 2 water connections goes into the thermostat housing which is no drama at all.

The remaining 3 - have positions to go INTO THE BLOCK - which I DO NOT WANT TO DRILL as its been rebuilt and any shavings or etc will go into crankshaft which is no good :oops:

It has been suggested by a mate of mine to drill and tap into the sump for the oil drainage from turbo (easy as)

And for the oil feed - run it off the oil sender with a T connection (oil pressure on guage will drop a bit i guess.

One left... the second water pipe which is near the front of the block - also drilled and tapped. where can i put that ?

What have other people done in aftermarket turbo kits??

Hope u can help

TOM
Top
Posts: 46
Joined: Tue Aug 05, 2003 8:44 pm

Post by bill »

mine is oil in ....screw out bung under sender unit on oil pump oil drain...i welded a half inch socket bsp into sump....water in and out are t pieces in top of thermostat housing for turbo and heater hoses cheers Bill
Top
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

will have a look at mine at about 12pm today (lunch @ work!) and let ya know. I have a td4.2 with aftermarket turbo, so should be similar.
I am pretty sure the water lines come from the heater hoses but unsure after that.

Will let ya know

Cheers
Brian
Top
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

Well I know this is going to be of no use to ya but....

didn't get a chance to have real good look but it looks like water in from thermo housing. Then there are a couple of bungs in the side of the block for oil and prolly water out too.

Sorry mate.

I am sure you could rig something up. And as for oil pressure dropping if putting in before the sender. I very much doubt you will notice anything.


Sorry couldnt help more
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

fatassgq wrote:Well I know this is going to be of no use to ya but....

didn't get a chance to have real good look but it looks like water in from thermo housing. Then there are a couple of bungs in the side of the block for oil and prolly water out too.

Sorry mate.

I am sure you could rig something up. And as for oil pressure dropping if putting in before the sender. I very much doubt you will notice anything.


Sorry couldnt help more


Yup thanks very much mate. I'll work something out as usual ;)

TOM
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 64 guests