Outer Limits 4x4 Board

I had drama's with my mq headlight's, I found there is a relay in the circuit up on the inner guard that caused all my grieve. I spent many hours messing around with the headlight switch before I found it.

my understanding is the tacho is connected to the back of the alternator, but don't quote me on that.

I have got a cheapo lokka in the front (from 4wd systems) and factory lsd in the back, I have had no problems with this set up as yet. I have driven with set up thru the vic high country and down border track on vic and sa border and had no problems. This set up also has had a regular trips to bunyi...

thanks for the info guys, will have to look into other options

Does anybody know if the 4.8 litre 5 speed auto will bolt in behind the TD42T in an early GU and if much work is involved.

Or has anybody fitted other auto's behind the TD42T other than a GQ 4 speed auto.

have you considered just trimming out wheel arches/guards and fitting 35 inch tyre's followed by lockers, front an rear (or just one locker).

I current run similar setup to you just with a front lockrite locker and I am driving over up or though plenty of obstacles.

I have recently used the loctite fuel tank and radiator repair kit, it works pretty well as a temp fix, it got me home again. But I wouldn't want to rely on it long term. Pulled tank out since and had it welded up again. But that said I punchered my commodore tank years ago, before I could afford a ...

I sold my 60 two years ago for $16500 and it wasn't that modified. I had a 1990 GXL diesel WITH NO TURBO, sitting up on 2 inch springs, 2 inch blocks an 32 inch tyres (hadn't got 35's yet). front & rear bars, rear draw system and coms gear. didn't even have a winch or lockers. Was lucky enough t...

In the seven pin there is 3 pins for power in, 1 for each head light out, 1 for the parkers out and 1 for the high beam relay. I believe the 6 pin is the 24V switch as mine is 12V and its a seven pin. use a multi meter to trace the cuircuit operation, but I believe the 24V switches had only one powe...

In the seven pin there is 3 pins for power in, 1 for each head light out, 1 for the parkers out and 1 for the high beam relay. I believe the 6 pin is the 24V switch as mine is 12V and its a seven pin. use a multi meter to trace the cuircuit operation, but I believe the 24V switches had only one powe...

try brown davis in bayswater

http://www.browndavis.com.au/

the engine won't cool that much for it to both about while setting clearance's. but before start take it out and give the truck a good run to ensure its at running temp timing marks are on the front of the timing case and they line up with the mark on the harmonic balancer. hard to see them, put han...

if u change the exhaust wheel in the turbo it is possible to spool up the turbo faster or at lower rpm. you would have to contact a turbo specialist for the parts. to gain more boost adjust the boost controller or replace it with a different one which is adjustable. others on here have modified the ...

the glow plug module has it own temp sender in the motor (i think its in the lower termistat housing) test it with a multimeter as it may be faulty. some glow plug modules break down internally and just have to be thrown away.

I have purchased one of those tigerz11 winches off ebay, strong winch for a good price. A mate purchased one also uses it on the farm to pull tree stumps. You should also be told the bolt holes are a little wider apart than a warn winches so some adjustment to the bull bar may be required. They are ...

My Mk is fitted with ironman suspension which works reasonably well for budget stuff, but if ur replacing springs its normally advisable to replace shocks with the springs. that way the shock should match the operating range of the spring and the weights carried. list price for complete kit of sprin...

okay fella's i have a 1986 MK GL SWB patrol, she had the steel flared guards as fitted by factory, untill they where removed for 33's. GL's had custom pinstripping with GL in the stripping on the doors. color coded canopy, factory power steer as standard i believe, and full headlining under the glas...

for your injector pump and injectors check out hiflo diesel in springvale, they only do diesel injection. they sell to a lot of diesel mechanics around the traps and through don kyatt in moorabin.

somebody is selling new mq taillights on ebay.