Outer Limits 4x4 Board

Pfft yous are all Dudelux, stock box hanger, teh massivest shackles, bit of surface rust, some welded duffs, and some 38s for onroad driving and we'll be rolling all night with a full tank of unleaded. And instead of doin hi steer just invert ur drivers shock so the J arm dont hit it, makes sense ...

ill cut ur loom, and give u a new one, wire it in ur self and ill give you 500

Just use the std one, it works fine, hilux handbrakes dont work anyway haha.

Injecotr pump solenoid, playin silly buggers, it causes the preignition type spluttering, odd that it would turn off when backing off, possibly low battery voltage/charging system or worn/loose connection on the solenoid. Its the single wire connection ontop? or at the back of the pump (closer to ...

mod'd luxs are worth more parting out unless you cbf doin that

maf sensor, fouled plugs from old/dirty fuel, intake hose on wrong side of sensor etc did you use the same maf pipe, if you stuck it in a 3inch pipe for eg you would be drawing alot more air than the motor would think = lean = miss = stall. sick injector, sick coil pack, sick plug lead. I would be ...

Sensor in top of brake master res, it triggers the light when you are low on fluid, and/or a faulty sensor or wiring.

I'm on the other side of the fence, if you plan on doing it for fun not just a 6 month phase your going through, lockers would be my first mod. all the flex and sick hectik marsden spec rubber wont help you when its biting into thin air. The std front end will work better than you think with a set ...

1400 seems quiet steep for a simple rebuild, i could understand 1400 if it were to be highflowed etc, id get a few more quotes, even if you have to post the turbo somewhere.

Heavy duty ladder/roof racks, will pass with that reason, although some don't like the "smartarse" use of the term, and might look a little harder at other modifications.

Got a 2x3 mini bar (6 in total) a pair would be great on the bar, takes up minimal room and fits anywhere, for about $135.

http://rapidshare.com/files/52017445/Pd ... ruiser.zip" onclick="window.open(this.href);return false;

Any parts retailer will be able to tell you, or just have a look in the book in the oilfilter/airfilter section.

99' onwards i think.

They are all 5x114.3, ford are the same, altrhough different offsets between the 2, but some will work. ford territory's are 17 or 18inch?, should fit, so long as offset allows for it

Most if not all 2wd hilux's have 5x114.3, the 4x4 obviously has a 6stud hub.

Alot of varying things will effect fuel economy, including factors out of your hands. Different fuel grade, different ambient temps compared to newcastle.. 12.5 is still far from bad fuel economy, 3l/100 is no big deal, i would run another few tanks before thinking about wasting money at a mechanics ...

There is a late model g52 which possibly could have different ratios, but im not 100% sure.

Although most box's with different ratio's, have a different code, among other things, like w56,w57,w58 etc etc.

Its a bit hard to get good photos, to show light pattern/distances etc with my average camera, all in all it spreads a good amount of light, more than i was expecting from led's. From the info/specs, i would say the ridgid (snake racing) ones are better although only in reflector/optic design and ...

I've got a couple here from OZLED in brisbane, ill take some pics tonight and post up how blinding they are, just it being on in the daylight is quiet impressive. There a nice solid extruded ally housing with multiple ways of mounting included in the housing, they dont have the distance that a ...

Thinner oil than you had in it, possibly inj pump could be a bit out of time.

mount it as close to the firewall as you can, or you run into clearance issues for clutch fan, and mount it low enough to the p/s pump doesn't hit the bonnet .

Exhaust cooling down, etc, alot of cars make a noise, hard to translate a noise into text though haha

Havn't fitted anything new to the motor or somewhere where it cops alot of heat?

Dont worry about the pinouts to much, just cross check the wire colors and find the other end of the wire, work out which sensor plug it is and then its narrowed right down. all the stuff you would want to use should be the same, you can work everything out with a multimeter thats what i did but ...

yer get someone to pin point the problem, then take the alt off ya self saves ya whatever ridiculous amount they charge these days

g52's arent rare, sarcasm doesn't come out in text haha. I'm not the only one who hasn't broken heaps of them, they aren't strong, but the 5 people i know for a fact that they cop punishment day in day out or in the bush driving round like they stole it, among others that arent modified or driven ...

I took the bait, n i'll bite and stoop to the level of "my milkshake brings all the boys to the yard". So you just dropped it upto leon and threw cash at it or what? haha No i wasn't saying you cant drive, depends alot on how theyve been treated and no there not the strongest box, but ive never ...

If you do do the job neat enough, no one will know. Indeed, i welded a bit of 75x75 5mm wall in between the back of my chassis rails and half checked the hayman reece thingo in, braced it with some plate like standard, its up nice and high now with a drop down tongue, strong, and noone knows. Just ...

.8 be good, it's not just the housing that contributes to matching a turbo. .6 improved performance, .8 similar response with more top end.

Thrust bearing vs ball bearing makes a fair difference.

Didn't need to drop the oil and oil filter really, but if its new it cant hurt. If you've cleaned it all out and theres any small trace of fuel left its not going to hurt it, it might have a cough or rise in rpm for a sec haha. Could have drained fuel out of tank, changed filter, and cracked the ...

I'd take them back and get them redone, people love doing stuff for free when they cant deny they did an arsehat job. Pull the valve out of tyre. Put tyre on ground under bullbar or under anything real heavy, put base of hi lift right near the edge of the rim/bead, and hi lift jack point under ...

Does it happen as soon as you turn it on or does it take a little bit?, how big is your battery, does it say ca, or cca next to the amps. The battery alone should be able to deal with that load for a reasonable period of time. What voltage does the battery produce after the motor has been off for an ...

You can use a toyota bellhousing to mate a r series box to a 3rz, depending on the model of box it needs a 36mm spacer. 2TRFE box i think its called its from the hilux's/prado's with vvti 2.7s, no they are not 3rz's. So your popping 5th gear with a 2.8 turbo diesel in numerous box's, i dont know how ...