Outer Limits 4x4 Board

Help needed urgently!!!!

I'm travelling from Victoria to mackay and I've had to make a stop at bidwill Sydney as my radiator has sprung a leak, I have a gq tb42 which I'm running a 4 core copper radiator, where the cores are welded into the end tanks some of the top outside cores have crack at the welds. Can this be easily ...

lookin at 600x300x76 with 2.5" inlet/outlet, or would one with 3" inlet/outlet be better for flow? and with design is better for cooling? cheers for the reply

which intercooler for 200rwkw tb42 turbo bar and plate or tube and fin, which would suit it better?

chasing the wiring code for an ice 7 amp module 7100e?

plaese help

whats the best head gasket to use for tb42 turbo engine?

and where to get one from in melbourne?

just wondering what tricks/mods there are for keepin petrol engines running sweet in deep bog holes and deep water?

can you spary the leads with something to help?

can cover them in hose or conduct of some sort?

any suggestion would be great cheers

chasin the valave clearance for a tb42. inlet and ex.
cheers rob

looking for a good lpg tuner in the melton area , for tb42.
got my rig back from a service from local mech. and its running like shit and very had to start, need help!
cheers

thanks for the replys, engine been ruuning sweet since i started it, took it for a drive for halfa hour around town and didnt miss a beat but stiil zero oil pressure, so should be just a dodgy gauge.

which should i get electric or mechincal oil pressure?

cheers

havent started me petrol gq in a few months and when i started it up had no oil pressure to start with then, just warmed it up on about 1100 rpm for a few minutes and the oil pressure slowly built up just past one then few minutes later dropped to zero, shut it off, waited few minutes and started it ...

hi
after contact details of turbo specialists in melbourne to source quotes for tb42 efi turbo conversion

cheers rob

thanks for the replys guys
does any one have a set of efs extremes, what do they ride like soft or firm?
Does anyone have boss adjustables? what the ride like?
thanks rob

hi have gq lwb petrol/gas, tube bars allround, 4" dobsins springs, dropboxs, 2" body lift, shocks that dont work at all, and some very small koni on the front, need a better ride, would are people running and what would u recommend thanks rob

G'day me rear windows frames are rusted out, are swb rear side windowa the same or do the come out in the later models lwb? cheers rob

as above

I am rebuilding to my td42 engine for a turbo setup and would like to know how does pump mods and injectors in the victoria, or shepparton area thank rob

thanks for all the info guys
Hey Ainzy who made this setup and how can contact them?
can you send me some better pics?
thanks rob

who makes TD42 turbo manifolds?

do you know of any one building TD42 turbo mainfolds

does aus4wd have a website?

going to do a turbo diseil setup on my gq, wondering if someone got any pics of custom setup that could give me an idea of a few things.
what turbo to use?
what have people done about an intercooler?
where do you get manifolds from? or just make one?
and any helpful hints would be great thanks guys

does anyone know if you can get mq/mk transfer case gears or do i have to go bigger ratio diff gears, now running mk shroty, 355, turbo 700, 4.625 gears, 36" simex and lockers. first gear doesn't seem low enough, or do i change to manual gear box? what gear will fit and handle the power?

G'day i just removed one from my lwb mq its in good working order comes with cross member if you want it

i just put a shortwheel base 5 speed in with the transfer on the back so if your keen give me a buzz on 0448042091

G'day i have a mk swb, 304 holden v8, turbo 700, mk transfer case, 4.1 diff ratio and running 36" peds. at 100 km the motor revs at 2500-2600 rpm, would 4.6 diff ratios make it rev harder at 100 km or less? would it give me a slowler low range? please help as my pocket is hurting from the fuel bill

Gday ive just pulled mine out as i am puting a in a 5 speed with the transfer on the back of it
its in good working order no oil leaks changes esayily if you would be instereted give me a buzz on 0448042091 if i dont answer try again as me moblie is playing up
rob

G'day I've got an mq wagon with a 308 and 5 speed with separet transfer case. took 2 teeth of 5 gear hunted around for another one but the closest thing i can find was a 4 speed that lokks the same as my 5 speed, the guy at the wreckers my 5 speed has a after market housing on the back of it, anyone ...

brought an mk swb and it has gu hub kit i have been told and one side for some unknown reason is missing the inner part to the locking mechism the bit that locks the free wheelin hub to the axle, can i just get a auto locking hub off a gu and put the guts of it into my free wheelin hub? are they ...

Got a flat spot in the efi holden from idle to quater thortle and then pick up again, mate rekones it needs bigger surge tank but has already got one about 4 litres +, took of the throtle body and cleaned it up a is a little better but still there.

what do i look for?

numbers don't mean much to me as i have rcently so my cruzer but i spoken to my old man and he seems to think that it won't be a problem, wher abouts are you from?