Outer Limits 4x4 Board

Hi,

Can anyone tell me the inj pump setting for a 06/04 hzj105(1hz). It has a cold start device with EGR

Thanks

Awesome keep them coming guys. More ideas the better.

Thanks

Cheers look forward to seeing them

Thanks look forward to the pics. Is there much power gain in fitting one?

I have read alot of posts from guys that have put intercoolers on 2.8d hiluxs with ct20 turbos on them but no pics/info. Can anyone post pics and info as I wish to fit one and am lacking an idea on how to start.

Thanks

not essential. Apparently it minimizes off idle smoke.

thanks mate. i will look into it.

Mine has 15s sunnys on it with rubbers that match the standard 16s and it sits on 2750rpm@100kph. Sounds like yours is ok to me.

Edit:any chance of getting some info/pictures of your intercooler setup as I am looking to do this to mine. ie what inter you used etc

cheers

No. 2L have adjustable screw type valves and 3L have shims

What I did with the coolant was put a 2lt-e heater pipes and thermostat housing on. They both have the provisions for hoses to go to the turbo.

Thanks mate. Thats not real high of a temp. Mine gets to 550 up the range then the coolant temp starts to rise. Does anyone have any fixes to lower the coolant temp?

pulux,

thanks for the reply. Where did you mount the intercooler and what is it off?

Hi,

Can you blokes with turbos on 2.8 hiluxs tell me how much boost and what pyro temp you guys are running?

Thanks heaps

Yeah it was a problem with them. The new type of belt wont break though

Thanks for the replies fellas. I might have to change oil type. I am using RX Super.

The reason I am asking is mine takes about 10 seconds easy, even after it has sat for about an hour. I have had it for about 80k(it has 180k now) I have always run RX Super in it with genuine filters(they cost about $14 each) and I change the oil and filter every 5k religiously. I might have to pull ...

A question for any of you boys with the 2.8d hilux.

How long does it take for the oil light to go out of a morning?

What type of oil do you guys run?

I dont have a compensator fitted. Not worth the dollars I reckon.

there is a roll pin on the compressor housing preventing it from turning. You will see it better when you remove the circlip. What are you going to do about the waste gate acuator arm

tweak'e,

I know they dont come out standard i fitted the turbo myself. The pyro probe is just below the exhaust flange.

Fellas,

What pyro temps should be run on a 2.8d Hilux. It has a CT20 running 520 degrees. Want more go but dont want to blow it up. No intercooler running 9psi boost by my VDO gauge. Is 9 standard for one of these turbos?

Thanks

high n mighty, Mate!~ The problems you are having are the EXACT same problems I had. Here goes, For the water problem I bought the steel heater pipes from the wreckers off a 2LT-E. Then also bought the thermostat housing aswell. Plumbed one pipe from the heater pipes to the turbo water pipes and the ...

bastard,

Did it bolt on without any mods. The reason I ask this is because I was toying with the idea. Have you got pics.

Righto I have finally put my CT20 on my 2.8d and all is going pretty well except for the turbo intake and boost pipes. I have scrapped the idea of intercooling for the time being. What do all you guys use for the plumbing, I was thinking 2 inch exhaust tubing from the turbo to the inlet manifold ...

Thanks guys.

come on someones got to have done this before.

Hi,

I am wondering if anyone has fitted a top mount intercooler to a 93 hilux diesel? I am going to lift the cab I presume. Whats involved in all that?

Thanks

Ferrit,

No I havn't but I want to here from someone who has as I am trying to do just that. Anyone done it? Let me know please.

Thanks

4x4Monkey,

If the turbo is in good condition thats a fairly good price

I have all my bits for the conversion but I dont have the boost compensator. Does anyone know anyone selling one for a 2.8D?