Outer Limits 4x4 Board

A while back I bought an ARB "style" bull bar off ebay for the right $$$ to go on our D1, im very slowly fashioning into an ARB Sahara style looking thing. It had been sitting for a while and had suffered a bit of cancer on the under/inside where the mud and crud tends to lay. Ive been chopping the ...

I bought a set of HID's (BiXenon H4 Setup) from Soarer93 on Ebay, I think I paid 120 inc freight or close too. Anyway, They were advertised as 55watt 4300K and as I have nothing to compare it to output wise, they do pump out alot of light. They are nice and white and not yellowy like I expected. The ...

iffy earth?

Shonky Illuminaiton wire?

I would like to be able to run my foggies for that extra little bit of light, but it'd be just my luck to be pulled over and booked for it, which would then give the POPO an excuse to go over my car and find other little "things"... Im considering some bright DRL's but I doubt they'd show enough ...

Jimbo wrote:Thanks for the replies people.

PS: Will be hard letting go of the GQ. 330,000km and i have replaced the starter $120, Alt $200 and front control arm bushes $200 ans now an engine $1000.

Landy V8, bout the same $$$ to rebuild engine, Diesel, bout 4 times that LOL

only let down has been parts, they can be expensive but shop in the UK and you can get most things l;anded at your door step for less than half price. Cheers Starky I think relativly speaking parts are quite cheap. Esp stuff that wears like rubber bushes etc. We've had out TDi Disco for 5000Kays so ...

how does LED compare to HID? I have nothing concrete but we are optioning alot of our machines with LED (up from HID) at customers request. We just got in these crazy "COOLON" LED's and they are BRIGHT, dont resemble anything close to a traditional work light though. http://www.coolon.com.au ...

Hi This link was sent to us from a supplier of all our LED worlights that are becoming very popular on alot of our CAT gear we are sending to site. Just thought it was worth a look and maybe someone else might find it interesting, i think it may be slightly biased towards making the LED's better ...

As a matter of interest for myself and possibly others... in the diy project, which way round do they use the silo tube... The info and pix in the DIY are pretty poor to say the least! But looking at the profile of the Range-Rover Sill Trim, long side at the top, with the angle pointing at a 45 out ...

I am chasing some Silo Tube, and, it seems to be rare as rocking horse droppings... The other day I picked up a copy of 4x4 action and there was the Bonus DIY mag in the pack, inside they are making a set of slider for a rangie (project rangie, the red one) and are using Silo Tube/Section, its got a ...

i found the genuine toyota silicone sealant works extremely effectively. They seal certain sections on their engine blocks with the stuff. (there's a plate on the front side of a 4 cylinder camry motor IIRC) i always make sure i have a tube at home! Toyota "Black" on engine Toyota "Red" on Diffs ...

i found the genuine toyota silicone sealant works extremely effectively. They seal certain sections on their engine blocks with the stuff. (there's a plate on the front side of a 4 cylinder camry motor IIRC) i always make sure i have a tube at home! Toyota "Black" on engine Toyota "Red" on Diffs ...

Less than a week to GO!!!

I just bought a Quartet (4) of Race-Tech gauges, Boost, Oil Pres, Water Temp, EGT. They are a Stepper motor movement. Cost me $265 inf freight direct from Hong Kong (ebay) only had them for a few weeks so cant comment on their relyability, but I got onto them as there was a member selling the higher ...

Its not a soft dash Mod but its a little different.


http://www.aulro.com/apc/showproduct.ph ... 4285/cat/4

I want that bonnet bulge/rally light setup doo-dad. where is that from???

Nice build also, barwork looks clean.

Looking at a 93 Surf SSR-X with a 3.0L 1Kz Turbo Diesel. I think that I want to go the TD route as it just seems the only economical way of pushing 2+ tons of 4WD around (Gas is not an option) But I just dont know enough about it, ive been trying to edu-ma-kate myself a little, but all I hear/read ...

just remember how crazily low and long it is compared to what you had.

that can be fixed easilly enough.

there not that long, there a 97" wheelbase, but anyhting with the doors we need it going to have a longer wheelbase than the paj...

DUDELUX wrote: It sounds like a good buy if you want to trailer it home, and do an engine swap.

I was thinking that. could be an easy fix, could be a major headache, seems like low kays for engine damage...

Pinched this from an eBay Add, LN107 Hilux, 146K on the clock, appears in good cond body wise but; Motor needs work - has loud knocking/slap noise. Great buy for someone who wants to work on a great looking ute. and it follows... Q: hey mate. just wondering any idea what the knocking and slapping is ...

Guys, looking at a Grand Vitara as a replacement for our old SWB paj. Been without a second car for a while now and its getting painful, but I havnt realy found anything that grabs me by the "short and curlies" and says buy me. Anyway, digging around on carsales netted a 1999 Grand Vitara down the ...

Man ur engine must be fresher than mine was, I was scared to rev it past 4K!!!

Sigma-galant.com has a heap of techy info like that - also has maniacs with 4g45s that rev to 9Grand!!!

1) More than likley - Ratios etc can be found in the Mistu Tech Bible at the top of the Mitsu page 2)I believe the original tyre size would of been 205/80-16 or 205/80-15 depeding on the trim level of the car. 3)The Small Lever (Trasfer Lever) should go as follows: 4-Low 4 High Neutral 2 Hight ...

Arent they on the end of the dash board, drivers side???

IE, open the drivers door, and where the end of the dash meets the door (when closed) they are under a cover in a slight recess...

I dont think there are any others, except for the shitty fuseable links at the battery.

Ranga Ute - Nice man.

$6500 for a 98 tdi with 182k doesn't seem to bad to me. Your not expecting to pick one up for half of that are you?? If they were that cheap in WA I probably would have picked one up to replace my 97 v8 by now... Edit* thats the starting bid. Still if it goes for that it would be a bargain. No, not ...

You are a tightarse :finger: Check out the markets section on http://www.aulro.com Isnt the inter-webs a small place, I was watching ur disco when it was on the bay a while back! I have been told that the Manual boxes behind the TDi's are a little weak and prone to failing, as is the case with the ...

Thinking of upgrading to a Disco from the trusty Paj. Been looking for a manual TDi300 SE or thereabouts but the seem over-priced to me... Am I just a mega tight arse or does the diesel REALLY comand almost twice the price of its V8 Petty bretheren??? Here's what ive found recently: http://cgi.ebay ...

Sooooo, no one knows if the 2.3 manual box can replace the 2.5 auto box???

Surley someone knows something more than I.

Hi Guys, Im looking to upgrade my SWB Gen1 Paj to a LWB Gen1. I have come across a 2.5TDI NF Import which seems to represent pretty good buying, as its got power windows and the nicer velour trim etc etc. Only downside is, its auto :( and I really prefer a manual. I Also have a SWB 2.3TD Gen1 which ...