Outer Limits 4x4 Board

I use a Holden Statesman external fuel pump on my gti engine below the fuel tank with no surge tank. I have never had a problem with it angles or any other time. Cost about $170 new. Fuelmiser brand part number FPE-240.

Bit of crap in your carby probably.

Clancy this is what i did took me about an hour to get running.Hope this helps. When hooking up use the starter and charge systems from the sierra loom these plug straight in. Also use the temp guage tacho and coil positive wires from the sierra. From the gti harness you just use the engine ...

89 softop 1.3 GTi engine Stock 5 speed S3 t case 31 MTRs on 15 x 7 2" extended shackles 2" enforcer springs VS commo shocks all round 1" body lift Front And Rear lockrights Sliders ARB winch bar custom rear bar I'll drive anything but prefer rock. http://photobucket.com/albums/y226/toozuki/th ...

Put some spacer blocks between the carrier and the door and use longer bolts to reattach the carrier to the door.

I run one in front and back but I'm quite a large person.

About 300 to the tank. S3, 31 MTRs, standard 1.3 and exhaust heavy ARB bar and other bits of steel hanging off it.

About 300 to the tank. S3, 31 MTRs, standard 1.3 and exhaust heavy ARB bar and other bits of steel hanging off it.

Thanks for the info and pics I'll have to check it out properly on the weekend.

My bad in another thread. Any info on MQ diffs into a WT Zook would be much appreciated.

Toos

RHS is the go. Bashed mine heaps only the paint comes off.

Do you really need it?

I've put an extra leaf in front and back and moved the spare tyre to the floor in the back no more lean.

Had a 45l waeco for the last 4 years goes on camping trips and hard wheeling days and never missed a beat.

280 from rocky road last year.

That is cheap. Just remember you get what you pay for. Mine lasted about 2 weeks now farked.

$10 each from Tony truck spares the lights are baxters

$60 from a truck spares shop in townsville.

The led's cost $60. Igot the steel for free. The bar is a lot stronger than oe and can use my hi-lift on any of the three points in the bar and the middle one doubles as a recovery point. the bar is mounted to the same points you'd mount a towbar on and the sliders bolt to the outriggers on the ...

Forgot the pic of the sliders.

Made up some sliders and a rear bar cost about $80 all up. Let me know what you think.

Ultra blue silicon I think they call it blue max now we use it all the time.

I put a nt front centre in my front wt diff just changed the yoke.

There on 15x7.

Just got my 31's fitted today and they foul a bit on the springs at full lock. What have people done to fix this problem or do you just put up with it.

Cheers Ben

Heres a pose from Townsville.

Got mine from Rocky Road no problems at all.

Broke mine yesterday and yes you do lose steering and yes your better off removing it.

Thanks Paul it will probably be after xmas before I do anything I'm still trying to sort out the gti engine.

Thanks for that Drew now I just have to find one.