Tech Talk for Nissan owners.
Moderators: toaddog , V8Patrol
Posts: 4065 Joined: Thu Oct 24, 2002 8:31 am
Location: ACT
Post
by Wendle Tue Sep 09, 2003 11:48 am
DirtPigs wrote: Wendle wrote: I used an air hacksaw, much nicer, especially when working near the fuel filler hardware (no sparks)
He he... yep. I did have the hose handy when I was cutting there. If I had a petrol I would have been looking for another way to do the job.
I had a few interesting moments when welding there too. My truck dribbles a bit of fuel when it is on its side, so there was a bit hiding in the cavities between the skins
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 09, 2003 11:53 am
holy crappanoly
CABOOOOOOOM! How much crap did you find in your 1/4 and the web / recess that comes down from the rear bed area?
Posts: 4065 Joined: Thu Oct 24, 2002 8:31 am
Location: ACT
Post
by Wendle Tue Sep 09, 2003 11:59 am
inside the quater was OK, but that brace was chockas, and it was all compressed in there.
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 09, 2003 12:05 pm
It's open at the moment, but I am thinking of sealing the entire brace hole up to the top with expanding foam so that there is no void for the crap to accumulate.
Posts: 4065 Joined: Thu Oct 24, 2002 8:31 am
Location: ACT
Post
by Wendle Tue Sep 09, 2003 12:42 pm
nah, that'll work like a big sponge and hold all the water there.
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 09, 2003 12:55 pm
Wendle wrote: nah, that'll work like a big sponge and hold all the water there.
You can get the waterproof stuff. We use it to seal cable voids. It forms a water tight skin on the outer surface.
Posts: 3451 Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE
Post
by A1 Tue Sep 09, 2003 1:33 pm
Cool JK bout time cant wait to c ya pics but i guess its guna be similiar to every1,s elses
[b][i] DAN [/i] [/b]
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 09, 2003 1:56 pm
A1MAV wrote: Cool JK bout time cant wait to c ya pics but i guess its guna be similiar to every1,s elses
ha ha
BTW, the sikaflex worked like a dream! The end product is similar to yours actually. Probably not quite as neat... I wish I had your skilz.
Don't go blasting water up that hole... you will fill the inside of your truck!!!
No bar yet... but soon hopefully.
Posts: 3451 Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE
Post
by A1 Tue Sep 09, 2003 4:32 pm
umm nut i sealed around the inside of the body mountins and shite so hopefully iwont
and bout ya bar geee i hope ya dont dent those new sections on sattdy night
[b][i] DAN [/i] [/b]
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 09, 2003 6:56 pm
A1MAV wrote: and bout ya bar geee i hope ya dont dent those new sections on sattdy night
He he... so do I. Would be bloody typical hey!
Posts: 3825 Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
Post
by moose Tue Sep 09, 2003 7:09 pm
DirtPigs wrote: A1MAV wrote: and bout ya bar geee i hope ya dont dent those new sections on sattdy night
He he... so do I. Would be bloody typical hey!
pics ...................biatch !!!!!
MissForbyNoob wrote:
Posts: 40 Joined: Thu Jul 10, 2003 7:58 pm
Location: Perth WA
Post
by GQSHORTY Tue Sep 09, 2003 9:50 pm
hi any u guys got a pic of the fresh cut hole no plate
When the clucth drops
Posts: 3451 Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE
Post
by A1 Tue Sep 09, 2003 9:55 pm
nope sorry mate have a few of with the plate
[b][i] DAN [/i] [/b]
Posts: 40 Joined: Thu Jul 10, 2003 7:58 pm
Location: Perth WA
Post
by GQSHORTY Tue Sep 09, 2003 10:22 pm
you can post them if u want or send them to me in a pm
When the clucth drops
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 09, 2003 10:47 pm
Damn your a testy little bunch of vegemites... here are a few piccys of my chop.
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 09, 2003 10:56 pm
Ugly without the tube bar... but you get the idea.
Posts: 1508 Joined: Thu Jun 26, 2003 9:48 am
Post
by MQ080 Wed Sep 10, 2003 1:15 am
I agree with anyone who agrees with me!
They look so crap with the cuts, true the departure angle may be increased big time, however @ what cost?
I thing the MQ is going to get some heathly bar work to wrap round the side... hmmmm bending pipe
Posts: 7 Joined: Wed Sep 10, 2003 9:50 am
Location: Perth WA
Post
by George Minaides Wed Sep 10, 2003 10:01 am
If you put a 3inch body lift on a short MQ you shouldnt have to cut the body only replace the bumper
Posts: 4065 Joined: Thu Oct 24, 2002 8:31 am
Location: ACT
Post
by Wendle Tue Sep 16, 2003 2:23 pm
Raison d'etre - I don't see any other way to stop that area being constantly hammered without cutting the panel back to get some steel in there with which to grind.
Posts: 1508 Joined: Thu Jun 26, 2003 9:48 am
Post
by MQ080 Tue Sep 16, 2003 4:00 pm
The back still sits out on the MQs but. Approach angle is fine though... the exact opposit of an FJ40
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 16, 2003 4:54 pm
I have to laugh that this is a whole thread about 1/4 chops on MQs... yet there is not a single pic of an MQ rear 1/4 for comment.
Posts: 1949 Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia
Post
by MKPatrolGuy Tue Sep 16, 2003 8:47 pm
Here ya go JK
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
Posts: 3229 Joined: Tue Oct 22, 2002 9:00 am
Post
by JK Tue Sep 16, 2003 10:16 pm
Thanks.
Looks OK. Also looks like it gets used.
Posts: 2056 Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne
Post
by Big Red Toy Sat Aug 21, 2004 2:00 pm
we'll my 1/4's are off now
, cut them level with bottom of the rear tailgate. then i broke out the fibreglass.
Done one so far, will finish this week and post pics
Style Side Maverick Ute
Posts: 5060 Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney
Post
by Screwy Sat Aug 21, 2004 6:27 pm
mine are done as well, just havnt made em perfectly pretty yet until after the paint job. Pics are in members.
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Posts: 470 Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale
Post
by Camshaft1 Sun Aug 22, 2004 1:43 pm
On the outside cut a 9inch grinder cut about 2cms from your mark. then a good pair of tin snips. worked wonders! not so the inside cut. needed 4inch grinder for that!
Posts: 2056 Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne
Post
by Big Red Toy Sun Aug 22, 2004 2:10 pm
oxy
Style Side Maverick Ute
Posts: 11 Joined: Thu Jan 07, 2010 10:35 am
Location: Logan
Post
by twocartonsnachilliburger Thu Jan 07, 2010 10:39 am
A1 wrote: Gq shorty
how do i see pics want to do same to gq lwb cheers
Posts: 45681 Joined: Wed Nov 27, 2002 10:13 am
Post
by bogged Thu Jan 07, 2010 4:18 pm
twocartonsnachilliburger wrote: A1 wrote: Gq shorty
how do i see pics want to do same to gq lwb cheers
start by lookin for one of the twentyteendozen threads that are 5yrs newer with photos
Users browsing this forum: No registered users and 1 guest
holy crappanoly 
If you put a 3inch body lift on a short MQ you shouldnt have to cut the body only replace the bumper
