Outer Limits 4x4 Board

Try the kick panels. Of memory it is taped to the wiring loom. two wires going into a little black plastic thingy (diode pack). Wire colours something like these red / black red /white red/ yellow


Good luck


Rob

Once you move it forward it may hit the tubing under the headlight too. I believe mitch's use to rub in places too. Mud_Muncher will catch up soon and talk ideals.



Rob

OMU 40mm lift from ARB. Think it's around $700 springs and shocks. You will need to trim the the front guards a little at the bottom rear.

Yes 2morow. At 8 be early thoe for a chat as always.


Rob

Yes Renaults engine but nissan is using it too. with the matching auto. I could be wrony and others maybe able to more on this.

I heard there won't be an auto with that engine. Nissan has the rights for the auto and engine.


Rob

Yes do come down to a meeting and have a chat. We should have two 01 jimny's at the next meeting. http://vic.suzuki4wd.com/ A sunraysia type rim 7 inch you will need to trim the guards alittle.


They www.jimny.se for more ideals too.

Rob

With the m13a the a/c fan will kick in when too hot also.

Good to hear your coming back H will have to have a drink or two. Anyone who has gone larger than a 32's has maintence issues. Bearing and seals etc. And as other said the girlie cv and axles. If your going to all that work too will it be a second car. It will be in the shed for a while too. Budget ...

Check the Flasher Can. Hazards wont work also.

cj wrote:APIO low range gears

X2 I've counted the turns 3.5 to 1 in low. I love it.


rob

Put a snorkel on the Jimny all by myself today :armsup: Mind you I had to lwork out what an arbour was and how to fit it, where a vacuum cannister was, pysch myself up for 20 minutes before I was happy I hadn't screwed up the template... then start drilling :shock: Only thing that saved my arse was ...

apio does a transfer gear too. low range only. 3.5:1 great on 30's but costly.


Rob

I've heard yes. Lower ratios. I believe someone is trying to remove the electric transfer and put in the older manual type. It's meant to be lower ratios. Not sure where the gears are from. The auto or newer type3 vvt. Search jimny.se too

Rob

The jimny above had so many problems it was redone. Oil leaks everywhere. All the sydney jims I've seem sit way too high. In the early days too all were open diffs too. I've seem a cool videos of davo's. But it's not really a jim with hilux bits. Move the front diff forward and cut the guards. what ...

I heard about $1000. CJ we do know someone who may
be parting one out in the future.


Rob

You may need to cut a little from the back of the transfer hole. In low it may not go in 100% and will tend to pop of of gear. Front left brake hose . Maybe do a small spacer on the steering. It can pull / move the bearing on the shalf in the fire wall. Not sure if a two inch can be done on the ...

Heres where I will enter into this. Yes jimny axles and cv's are weak. Anyone who has locked the front end will know this. Yes h/d parts can be bought from overseas but do cost the earth. By the ways ppl we had a jimny in our club with 32's locked both ends a "2 inch lift" and of course gearing ...

http://cgi.ebay.com.au/SUZUKI-JIMNY-JLX ... dZViewItem

Will this be stimpys fourth owner.

Suzookme keep me post on how you go. I interested in your old axles the cv's.


Rob

What is the ideal behind this. You can get gears for the jimny. Would cost about the same as a conversion kit. A company is syd dose them too. Squik and other in the NSW suzuki club went that way.


Rob

Sorry forgot again to measure. Also there is a transfer in syd on ebay for $200

Rob

brianstevens what state are you in. If melb I would be able to help you out on this. Have a spare trasfer too. I think this would be a easy think to do. Wiring is easy. Did I read right you have change to manaul hubs. If so even easier. Have a look under the car there maybe a plate or something ...

I do know of some trail jimny gears for sale. From melbourne second hand. http://www.geocities.com/trialjimny/ PM me if your insterested and I will get you in touch with the 3rd party. For the bar I chopped down a arb one. Took the top rail off and cut large holes all round to lighten it up. A 1 ...

install a microwave sensor alarm? i have them in all my cars :D soft tops and hard An alarm is only going to tell you it has been broken into. You will find out either way when you return. Shopping centre etc useless. Even thoe I have a hard top just dont leave anything in it. Use a back pack or ...

Its will depend on wheel offset too. On a standard 5.5 you will only need alittle from the guard at the bottom rear.You did not have to do the bumper. Have fun.

Rob

No mods are needed. I have the ome kit. Love it. Most 2 inch kit are really 40mm too. Try www.jimny.se lots of jimny owners. Also with a 2 lift you can get a 30 with a little trimming in the guards. If your not handy with the tools go for a 28 inch tyre. Plus its legal too.


Rob.

Love the first pic the one with the wire jammed under the fuse. hmm

Two words. guard cutting



Rob