Outer Limits 4x4 Board

could it just be that it is an open centre, makes sence, my hilux/4runner rear drivers side is the drive wheel, which would make the passengers front the opposing drive wheel. Id try holding the passengers front somehow and seeing if the other turns. Disclaimer: I know next to nothing about diffs ...

I had the exact same problem, the reverse lights do run off the same fuse. underneath the gearstick there is a smallish loom, of which i had a wire rubbed through to bare wires, everytime the wire touched the body, bang, the fuse went. It took me 2 weeks of searching, cursing and hoping to find it ...

I have a 1987 IFS 4runner. In relation to the short side of the diff (drivers side) the CV goes straight into the side of the diff. Now I can pick up the diff side of the CV and move it a good 10mm up and back down again in the diff housing. If I hold it up it will leak oil. Im trying to gather ...

i have an 87 4runner so its likely to be the same, the left hand of the trangluar braces between the front crossmember and chassis rails has a hook mounted using those 2 bolts. its right up the front so its pretty easy to find. sorry im not that fluent with the right terms i hope ive explained it ...

i think Swerve is planning on towing his boat up to Logan from sydney, and is worried about it being pinched up here and not leaving it at home on the footpath. Am i right Swerve?

mate i have a mongoose M80 in my 4runner but i didnt install it, i got autobarn to do it so cant tell u too much but i can tell you that my interior light has nothing to do with the alarm and i can remind you of the auto locking if you dont open the drivers door, any other door and it wont recognise ...

The tacho stopped working in my 4runner a while ago, the connector on the circut board on the back of the instrument panel had a broken contact, I just put a bullet on the wire and followed the board around to somewhere that I could put a o-ring underneath a screw. It would have been better if i had ...

They wear quickly on road, but is it still cheaper to buy these- a cheaper tyre more often over a more expensive tyre that lasts longer? Being on my first car and first set of tyres ive purchased for it i couldnt tell you what sort of mileage im getting from my current Dick Cepick II's.

i got a quote on my diff today actually, it starts at $670 just for bearings and only goes up. Im gonna get one from the wreckers i think!

me and a mate did his on the weekend. pull the tailshaft off, take the uni apart carefully, mark which way it come apart too! mark where the nut and everything else is, take that off too, take off the half of the uni thats left, marking where it went on the spline as well. Change the bearing and ...

my mates triton was doin the same thing, we replaced the centre bearing on the rear driveshaft today and its all good now

Go the silicone wiper blades Troy. $9.99 from supercheap thay are great. untill they break and you have to replace them every 3 months :x when they work they are great but what blades are u buying? mine have gone 12 months so far and they arnt broken down. the supercrap ones.. i got the clear I'm ...

j-top paj wrote:

tojo_runner wrote:Go the silicone wiper blades Troy. $9.99 from supercheap thay are great.

untill they break and you have to replace them every 3 months

when they work they are great but

what blades are u buying? mine have gone 12 months so far and they arnt broken down.

Go the silicone wiper blades Troy. $9.99 from supercheap thay are great.

We used a set of bearing pullers on mine. It took a bit of patience (sp) but got there in the end. Tapped the end of the pullers lightly with a hammer and just going a bit at a time letting it do its thing slowly but surely.

Does anyone have a video of the TJM territory doing the circut, i was inside talking to people at ARB and by the time i got out it had finished

Its all good mate. Learn somthing new everyday! May this thread be helpful for at least one person in the future!

well ive just finished swapping my cam and rockers over. it all worked just fine and its fixed my problem!

have you got a hammer?

ok. Thank you for your input with it, and if anyone else has any...? we will be attempting to do this on the weekend. I will let u know how we go

will it physically not fit or will it foul when we try to turn it over?

2 mechanics have told me no worries it used to be a really common thing to do that a 2L motor is a 2L motor.....

I have a 2L motor which i think is either 1982 or 1983 which has cam followers and a front gernal (sp?) which leaks oil when its idling, and also a 1987 2L motor which has a good camshaft and roller rockers. What i want to know is can I put my roller rockers and the cam from the newer motor straight ...

and connected the wired thing back that comes off the base. very small thread hijack just looking for a quick answer. What does the cable coming off the bottom do? changed the filter in my mates car the other day and couldn't see where the cable was supposed to plug in. On the Primary filter or the ...

quarter windows, some people call them quarter lights, im not sure if youll have them, they are on the older cars. youll know if youve got them. Its like having 2 windows but one flips around on a piviot point and the other one is a normal one

bigbrowndog wrote:

cheers.

Those gregories manuals are worth their weight in gold!

as far as im aware if youve got quarters youre set for putting a 6x9 in there if you want to. the width of the quarter down the height of the door is empty-youve just got the actual depth of the door to worry about.

Does anyone in brisbane area have an engine crane i could borrow this coming weekend? Im doing a straight swap of a 2.4D in a 4runner and will obviosuly need a crane for it.

Thanks in advance Tim

id even leave the bucket off the digger. jus use straps on the hook behind the quickhitch. buckets will only get in the way

yes the microswitch is on the left as u look from behind sometimes u can press on it and its enough to trip the microswitch. Just the other week mine decided not to play nice and stopped altogether i figured oh its dark ill look at it tomorrow. Jumped in to go to work and nothing wrong with it ...