Outer Limits 4x4 Board

thanks and yeah i missed the 5 in NIS-101HLE so these should be right then which is great news

Guys need someone in the know I have just upgraded my shocks to EFS extremes ( hand me downs ) the fronts are stamped 39-7008 and the rears are stamped 39-7002. my question is for the suspension gurus what coils would suit these without going over the 4inch mark if possible. I have a set of nis ...

hey mate there different in the starter motor bolt holes. TD has three holes and the TB has 2

horndog wrote:Havent had to much to do with tb42s but don't all carbys have a return line already.

the tb42 normally has the return on the mechanical pump so trying to work out where to fit it in when not using that one

anyone?

bump

Hi all i have just installed a holley blue into by TB42 and am interested in where to tap the return line into? The pump is attached to the chassis close to the tank at about mid tank then runs to the fuel filter in the engine, then to the regulator and then finally onto the carby. what im ...

okoffroad.com is where i by mine from

last lot that i got has done 4 comps was 11mmx45m of amsteel blue and cost me approx $500 delivered

Drafty wrote:Just wondering which way you guys are heading up. We are leaving at about 3 from Melton.

we left at 1500 today from melton. Just getting to Hay if we go through i will post up the road condition if not i will do in the morning.

bigears wrote:

Ginger Patrol wrote:Dear Competitors

Please check your emails for offical notice on Engel Round 1.

I got nothing in my email ?

Same here

Coxy, ARB do a hook at a resonable price the ones where the more force on the rope end locks it in tighter. pretty sure the last one the guys brought were $40-$50.


Or have a look on here
http://forum.mudrhino.com.au/viewtopic. ... winch+hook

Last time this happened with mine it was due to broken pins. replaced them and all worked as normal

had a play with things today and it looks like a vac leak will know more tomorrow

Guys I have just put a electric self regulating fuel pump on the patrol and I am now findign a huge flat spot around 1000-1200 RPM.

How do i work out if its overfueling or underfueling

thanks.

anybody? would like to be ordering one today if possible just dont know what type

I have a carby TB42 and I know normally they run a mechanical fuel pump but im looking at going electric and am wondering what is people are using and what is good?

Is it a hard job to do?

Just looking at the entry form and was wonderign is there anyway to pay bt credit card?

Would just like to Say a big thank you to Mike and Darren for organising the Bootcamp side of things as My navi and I learnt a huge amount.


Had a ball watching the SSS guys as well.

yeah I'm running Monza seats and Simpson 5 point harnesses ( fifth point not fitted for now ) Mine are also 3" wide to spread the load as mentioned. The only thing i have found with the monza is that they are a tight fit width wise into the GQ and down the track will be looking at may be replacing.

Any news on dates for Round four and VWC yet guys. Need to look at booking time off at work

Rangieracing have a look here also has link to application form.

http://forum.mudrhino.com.au/viewtopic.php?t=3370

Got some 3" simpson ones will post some pics when i get them fitted up in the next week or so.

had one from 2006 used it and used it then passed it on when i went to a pto set up.

interesting as i was looking at doing this with my Thomas but have decided to look into having the winch engamnet done by ram instead of cable so if anyone has done this please let me know. Here, this is for an mq, used inline restrictors on the outlets of the cylinder to slow it down and a ...

Milo, is this for a PTO winch and if so what sort? (toyota or thomas?). I'd be interested to see your progress with this regardless so keep us up to date with what you come up with.. :) It'll be for my thomas PTO, i got sick of getting in and out of the car to work the clutch, and it has a tendency ...

here is the only one i have with the PTO in it



will get some more when i get back to vic later in the week.


oh it was built by centravic performance 4x4

10m for comms to the phone as that is ussally the phone range but with head set to headset it is around 150 metres.

mine custom built to take the PTO