Outer Limits 4x4 Board

just wonderin if anyone has put ca16 into a sierra??
can get one off a mate just wonderin if anyone has mated one to the sierra box?

hi has anyone find a good engineer that has passed a set of 31s on a sierra and i know i couldve found a engineer meself but i want to find a good one and if someone has already got the tyes passed it would save me alotta time which lets face it is what these forums are about

ok sweet thanks i did actually look in the bible before postin and did a search . the bible which lets be honest is a mess could really do with a clean up i ended findin the topic which wrx gave me right in the bottom section so clearly i didnt look that far down im sorry fudly goes back to his corn...

ok i just put some spotties on the front ran all the wirin to the spotties ,battery and relay . so i pulled out the trusty test lamp to find the high beam wire at the standard headlight started testin and found they all had power all the time even without the headlights turned on. so i could run the...

i had the same problem with the centre leak but mine was a easy fix heheheh i unblocked the breather

hehehe hell when i say your first post and everyone was bein nice i was a little annoyed, if you were male they would of went off about usin search functions and lookin thou the bible till hell had frozon over and someone had gotten around to deletin your post . so if you think they were mean to you...

1) will the mighty kong transfer case mount bolt up to the origional mounts and dos it offer the added strength to the case (as in extra boldint points) to safly run reduction gear?? 2) are 6.5 gear overkill for only 30inch tyres ?? i was gunna just go the 4.9s but the 6.5s are $120 cheaper dos anyo...

ok so this is a small thread hyjack do body lifts after a few years crack out the body mounts on the body???

hehehehe yeah i guess a heavy duty pipe rack will work wink wink

dos anyone know if a exo cage is ok in qld with the authorities??

so oem have the best flexin springs???

i was puttin in the rear transfer output seal today and was wondering how far in is it surposed to be pushed??
is it surposed to be flush with the outter housing or pushed deaper into the recess a bit???

this may be a little off topic but i went to suzisport on the weekend and i was recomanded not installin a body lift as it cracks out the body were the blocks sit after a few years has anyone got any idears about this or have experianced it??

yeah sorry about that i reread it after you posted and thought i worded that a wee bit wrong hehheeh

how did you go with the rebuild was it straight forward or did you find some issues??

ah well thats a bummer im in brisi meself :( so what do you all recon would be the best/most legal way to get a decent ammount of lift(for bigger tyres) and a good ammount of flex for playin ive got a wt swb sierra atm stock standard well sub standard really but thats another problem

ive recently purchased a 92 sierra and was wondering if anyone has tried the 5inch suspension lift from snake raceing http://72.34.32.141/~snakerac/product_info.php?cPath=3_105_108&products_id=2334&osCsid=0887549ce1ed5d1dc44719d9838f8095 all i really want to know is if its worth getting valu...

ah dam i was hopin the rear output shaft seal on the transfer tapped oh well guess ill have to pull the transfer out :(

ok i just got a 92 modile sierra and i got a few questions i need help with

1)dos the rear output shaft seal on the transfer just tap in from the outside??

2)dos the pion seal on the rear diff tap on from the outside??

3)whats the easiest (less complicated) motor upgrade for me 92 sierra??

ok sweet i had a look at that ironman webbi and i think i got a option i might be able to go with, goin by the number only really checked the length and centre bolt positition rear 60 series on the front of me 47 (might have to thin the pack out a bit)which give aprox 100mm extra length and bring th...

if your still lookin for a cheapish winch
http://www.dealsdirect.com.au/p/electri ... lb-5440kg/

not sure what there like i just noticed it when i was browsin

i was wondering if anyone had a good site or info on leaf spring length/width im chasing a set of longer springs for me 47series ute ive read on ebay of a bloke puttin 60 series into a 40 are they a good option for the extra length im chasin?? ive already got extended shackles and i just need the lo...

when doing IFS rear to live axle, what length shocks are people using with this setup whatcha mean by independent front suspension rear?? and for the length wouldnt it be just outside your maximums as in slightly more then your full downward flex and slightly less then your full up?? not to sure bu...

surperior engineering actually do a kit for the ifs hylux which looks like it lowers all the important stuff http://www.superiorengineering.com.au/store.php?cPath=10_11_12 only for upto 95 model thou :( and snake races has a slimilar kit http://72.34.32.141/~snakerac/index.php?cPath=3_107_116&os...

from what ive read on these forums a auto lokka is a good cheap option for free wheelin hub vehicles as it causes less bind up in the front end. im only sayin this because a air locka will once engaded lock the front end totally whether your turnin or goin straight while the auto lokka will alow the...

just done put the 60 series backin plates one me 47series ute a month ago recon its about 10 times better. think i had to use a early model 75 series hand brake cable which was only just long enough didnt have to do any weldin thou thankfully. just used a bit of thread rod and a spring seems to work...

for flex what would be the best shackle angle to have sittin level ??? atm in me 47 cruiser sittin flat me shackles are pritty much straight up and down . am i right in assuming that if i moved the shackles so they angle more to the rear (either by movin the chasis/shackle mount in or longer springs...

has anyone tried them in both the front and the back?? ive got a old 47 cruiser and i dont think i could talk the wife into lettin me spend the sorta cash it would take to out fit her with air lockas and since the auto lockas are roughly 1/3rd the price (if not better) i thought they might be a usea...