Outer Limits 4x4 Board

Loved my bighorns, and will definstly buy again. Payed $210 a corner for 33's and was qouted $250 for 35's.

Bought mine from the big tyre group at lawnton

Going to remove my bodylift, so went to shed to find originals. As I only moved interstate 2 weeks ago, this was quite difficult. In short, I finally found 10 bolts about 8 mm thick and 100mm long. Are these it? If not, can someone send me the factory bolt lengths so I can get some new ones. Cheers ...

Thanks Dave for your help.

It's good to know that there are people who know what's going on

Much appreciated
Daniel

Thanks for the replies fella's.
Sounds like it might be worth fitting the 9 db one, and then getting a 3-4.5 db one that will screw on to the same mount as the one i got. That way i get best of both.

Whilst i have already bought it, i am hitting the road in 10 days, so if i need to swap it or return it.... then i need to do it quick .

Cheers

Hey guys, I posted this question earlier today in the auto electrical section, but since it has only had a dozen views i guess not many members look in that section. So since my issue needs to be dealt with rather hstily, here is the link. If you know anything at all about this topic, please lend a ...

Hey guys, I'm possitive that this topic would have been covered before, but a search through the first 10 pages of search didn't bring up what i was wanting to know. :roll: I have a UHF, it is a GME, not sure what one as it is in the car, i am at the computer....... anyway. i thought i should get an ...

mine did the exact same thing. gas guy told me that it was the auto thing on the back of the carby, and you dont really need it in QLD, so he bypased it and never had another issue.

Hope this helps.

Daniel

I aint giving advice mate, but i ran 12.5 on 7 inch rims for ages without ever having an issue, I could not see why you couldn't run 13.5 on 8 inch rims.

having said that i know they dont recomend it, and i am not the person to explain why or challange the reason.

Sounds like the plan, i wont be carrying 3 adults anyway, it would be me, me wife and one of the kids.

Thanks fella's

Cool thanks fella's, i might just tow it back i think.

I drive reasonably economicaly, and let the car do what it wants.

Hey guy's, Stranded in Melbourne and looking at options. Found a 93 td42 i'm looking at tonight. thinking of buying it, driving it home, and then putting the motor, gearbox and a few other goodies into mine. (It has 3 weeks left of rego, Mech A1, but body full of rust, and too bad to repair, Mine ...

Is that a GQ or MQ?

I have a mate with an MQ LWB with the driver +2 across the front and he wants to swap, would they fit? or do we just stuff around with trial and error?

Not sure about differnet models, but..... can you get a bech seat for the front of a GQ ?

Did the utes come out as a 3 seater, and will they bolt across to the LWB?

The oil company's are getting rich off me Just spent $400 on oil to service the car. $25 for an oil filter

I miss my F truck

Thanks heaps, i'll go get all the stuff today to do it.

Cheers

Going to Melbourne on monday, and want to give the GQ a service before i go.
As i dont have a manual or anything, can someone please let me know what type and amount of oil for doing the diff's and the auto gearbox for a 90 tb42s.




Cheers
Daniel

While i dont have 6 inch springs, i will not comment on the ride or vibrations as i am "uneducated", and all those who have not run 6 inch springs only, should keep their mouths shut too. However, i have 4 inch springs and 2 inch body equaling 6 inch total, and i have removed my sway bars. I take ...

That's all good........ as long as your tire is the size that is indicated. there is a lot of variance in stated size, and actual size. Best bet, Wrap a tape around your tyre to get the circumfrence and a more accurate measure. as isuzurover said. Circ / pi = diameter. 2760mm / 3.14 = 878.98 (mm x 0 ...

I better do something about mine then.

i have a landi system thats as old as ayers rock, and i get close to 200km's out of a 65l useable tank

i run 33's with 4.11 diffs and have an auto.

reasonable power, but no economy.

Are your rims 15 or 16"

Was looking at a set, and still considering getting a set, and saw that you can get a

33 X 10.5 X 15

35 X 11.5 X 15

35 X 10.5 X 16

This is what the site indicates anyway. feel free to correct me if i'm wrong.

At the back of your carbie, there is this cold start style choke. it looks like a pin that comes out of the bottom and it applies pressure onto the accelerator lever. Mine sticks every now and again, and wont idle. just wants to stall even when backing of. it may need adjusting at the screw (dont ...

Damn. Last time i bought one of those big spray cans they were only like $15. things have changed big time over the past few years. :bad-words: As ferrit said, get a cheap gun and buy it by the pot. make sure it's gravity fed, cause you will get a better spray. and you will always find another use ...

You can get a pretty good colour match for your colour code down at auto barn these days, do a couple of coats, then a few coats of clear. also lots of finger exersices, cause they're gonna get tired.

I run the maxxis bighorn, and i couldn't be more impressed with them.:armsup: i have had BFG, Wranglers, Kings, Baja CLaws, duellers and now these, and i will definitly be getting another set. mine are only 33's, but i am thinking of selling them for 35's in the same brand. Was qouted somewher ...

If you look on ebay, there is a second hand set of Adjustable Panhard rods at the moment, up to $150 for the pair.

As said, they do come up, just not alway's.

Keep looking. As said, you wont find many selling panhards or brake lines second hand, but i got dobinson springs and desert fox shocks for $300 second hand and still good. Last week a set of 4" dobinson coils sold in the sale section for $50. They are out there, but it could take a while looking ...

You sure it's not just the nobly tyres when you go slow? Mine used to do it with the claws, but not anymore.

I dont know what they are worth, but i had a spare NP205 transfer case (The one out of the early F250's) that i sold about 6 months ago on ebay for $50. i had a few watchers and 2 bidders and thats all it went for, so maybe thats all it's worth :?: They are a real decent transfer case though, as ...

i always use this one.

http://www.miata.net/garage/tirecalc.html

it's easy, and you can compare different tyres to see the size between choices, The difference it will make to your speedo and so on...








It also has a picture of the tyre too